Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

OT: HP PhotoSmart 3210 "Ink System failure"?

Posts

OT: HP PhotoSmart 3210 "Ink System failure"?

#1

OT: HP PhotoSmart 3210 "Ink System failure"?

Dominic Greco in Richboro PA

>Hi everyone,

Please forgive the OT nature of this post. Even thought this is a woodworking forum, I've found that we have such a diverse community here that I can post questions like this one. I'm hoping that if I don't get an answer, that someone here can point me in the direction of where I can get one.

I have a HP Photosmart 3210 All in One Printer that is just under a year old. It was installed on my wife's computer and was working quite nicely until 2 weeks ago when it started giving her some grief right after she ran out of ink. I believe that part of the problem was she was turning it off incorrectly (these USB printers like to have the computer turned off before they are). I purchased HP refills and replaced the empty ones. It was at that time I first noticed this error message coming up on the printers screen:

Ink System has failed. Unable to print, fax, or copy. Refer to printer doc. Error: 0xc18a0501

Since I could not get it to work promptly, I gave her my old printer to use and installed the HP Photosmart on my computer.

The troubleshooting section of the printer documentation had nothing on this error (Typical). When I went to HP's web site and Searched on the phrase "Ink System Failure", I found a small troubleshooting doc about this error.

I was told to:






  1. Press the On button to turn the printer off


  2. Unplug the power cord from the back of the printer


  3. Remove all the ink cartridges


  4. Wait two minutes


  5. Plug the power cord into the back of the printer


  6. Press the On button to turn the printer on


  7. Install the ink cartridges when prompted




If the error code does not display, the issue is resolved.




I did this THREE TIMES!! I still get the same error message.

Has anyone had this happen to them? I'm hoping there is a work around, or something I can do that will not require me to get this printer serviced. I bought it off of Amazon.com for under $200 and have a bad feeling that servicing it will cost just about as much.

Thanks in advance.

Dominic

Re: OT: HP PhotoSmart 3210 "Ink System failure"?

#2

Re: OT: HP PhotoSmart 3210 "Ink System failure"?

Brian Aust - Nevada, IA

>I hate to say it, but the last two HP all-in-ones I've had both died at about the one year mark. One of them was 2 weeks from being out of warranty, the other was a month past. Lucky for me my work buys them, but the one I have now is a Brother, no trouble with it so far.

On a humorous note, my buddy went to the store to get new ink for his printer and came home with a brand new printer. After his wife chewed him out for spending the money he explained that it was $10 cheaper to buy a whole new unit than to get ink cartridges. I really can't believe how expensive ink cartridges are.

Re: OT: HP PhotoSmart 3210 "Ink System failure"?

#3

Re: OT: HP PhotoSmart 3210 "Ink System failure"?

Ed Beck

>Maybe the ink cartridges need a cleaning.

Download the user's manual from

http://h10032.www1.hp.com/ctg/Manual/c00485555.pdf

Follow the instructions under

  • Maintain your HP All-in-One
    • Work with ink cartridges
      • Clean the print head


      • Clean the ink cartridge contacts

Re: OT: HP PhotoSmart 3210 "Ink System failure"?

#4

Service the printer

David Yoho

>I'm sure you saw this but below the solution it also said:

If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.

I don't know what "service the printer" amounts to but a new one would probably be cheaper!

I looked but couldn't find anything more than you did. Perhaps a call or email to their customer service would provide an easy answer before dumping it.

David

Re: OT: HP PhotoSmart 3210 "Ink System failure"?

#5

Thanks everyone

Dominic Greco in Richboro PA

>I got an email from a lurker here (thank John!)who pointed me in the direction of a website and forum dedicated to troubleshooting computers. From there I was able to find a Thread that documented what I should do.

I ended up downloading a patch to the software/firmware, and then resetting the printer. You hold down the "OK", "Cancel", "Black" and "Color" buttons all at once and then press "ON" (to turn it off). When you turn it back on it recalibrates and everything goes back to factory settings. I did this and it worked like a charm.

Thanks to John's timely advice I was able to scan and print in time to get some photos ready for my MIL.

Thanks again,

Dominic

Re: OT: HP PhotoSmart 3210 "Ink System failure"?

#6

Re: OT: HP PhotoSmart 3210 "Ink System failure"?

Dave Herman, West Chester, PA

>I have two 2210 printers that both have cartridge problems. When the 1st one broke I got an e-mail from a guy who worked for HP with a quick fix. That didn't last long, so I bought another one off of Craig's list. After a few months I got the same cartridge realignment error message. They are both sitting in my garage unused now. My sister has the same one that works fine. Go figure!

I buy new printers now too instead of getting new ink cartridges because it's cheaper!

Dave

Re: OT: HP PhotoSmart 3210 "Ink System failure"?

#7

about those new printer ink carts...

Bill Hammond, Oregon Coast

>New HP printers come with ink carts that are about 40 percent full. So it's not really cheaper to buy the new printer.