Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

It's been one of those days!

Posts

It's been one of those days!

#1

It's been one of those days!

Jim Orasky in Davenport IA

>I've been Trying to get a few turning projects (aka stocking stuffers) finished. Things are not going well!

Can you top this for a bad day?

1. Got my thumb a little to close to the nova chuck. Thumbnails are over rated - it will grow back.

2. Used a wire to burn in a groove to a wine bottle stopper. I thought I did it right, took some heavy gauage wire, added handles, then burned a nice neat groove. Then ouch - wire hot enough to burn wood will also leave a nice neat burn on two fingers when you grab the wire.

3. I cut down a Russian Olive Tree, last year. Thought I'd try to use

some of the smaller branch pieces to turn some ornaments. When I went to size the the rough piece in my SCMS, I did not have it stable enough and the blade kicked it out. Thought I got away scott free (all fingers and no damaged saw blade teeth) until I used the SCMS to trim a dressed 1X1 piece of maple. It too went flying. A closer look at the saw blade, 60 tooth 12" Tenryu, revealed the blade was bent.

I think I am going to call it quits for the day!

Re: It's been one of those days!

#2

Yes. Wise Choice.

Mark Mandell - Gone Round In Jersey

>

Re: It's been one of those days!

#3

Re: It's been one of those days!

Ken Oakley-Sunny St. Cloud, Fla

>My grandpa always told me-"Never put your fingers where you wouldn't put your tongue". Words to live by-----

Re: It's been one of those days!

#4

Re: It's been one of those days!

Barry Irby

>Get a small piece of inner tube that will just barely fit over your chuck and use it as a sleeve or sock. Something like a trailer or wheel barrow inner tube, and cut a big rubber band out of it.

You are having the sort of day that my Dad used to say, "shouldda stood in bed."

Get well and get back on the pony.

Re: It's been one of those days!

#5

It's a wise man who knows when it's time ...

Steve in Fresno Gooo Dogs!!

>to crack a beer and call it a day.

Re: It's been one of those days!

#6

Re: It's been one of those days!

Paul Waddle

>Yipes! I know how that chuck thing feels,I now use the hand wheel to stop lathe!

I sometimes try and work through a difficut period,but it just doens't work for me. I'm much better off doing what you wisely did,try it another day. pw

Re: It's been one of those days!

#7

Never surrender, only . . .

steve mackay

>retire to re-evaluate the tactical situation. 'Bout a day or so !

Re: It's been one of those days!

#8

When all else fails........

Todd O. Cronkhite Maine Native, Presently Away

>Clean the shop. ;~)

Glad the was no permanent injuries :~) other then the bent blade. }:~[

T.O.

Re: It's been one of those days!

#9

Re: When all else fails........

Jim Orasky in Davenport IA

>In fact, that's just what I did! Looks Great.