Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Is this shellac with wax?

Posts

Is this shellac with wax?

#1

Is this shellac with wax?

cfreeze

>Hey all.

Been away from the board/workshop for over a year....life does that to you now and again.

Anyway, I'm nearly finished with a walnut magazine stand that I've been building, and I went to mix up some orange shellac today for the finish. It's Lee Valley orange shellac flakes, part number 56Z4001, and I just opened the bag today. The bag is marked "orange shellac", and I assumed it was dewaxed when I bought it.

Mixed it as normal, but I wound up with a shellac that's very cloudy. Kind of hard to describe...kind of like hot chocolate made with water. Did I just whip up a batch of waxed shellac? The LV site doesn't say if the shellac is dewaxed or not.

I've never used waxed shellac before...always dewaxed. If this *is* waxed shellac, then I'm in a bit of a quandry as to what to do. I suppose I could let the shellac sit, wait for the wax to settle to the bottom, then decant the shellac. However, is there any real negative to using the waxed shellac on the walnut, given that it will be the final finish on this piece? I'd like to get this project done sooner rather than later, and waiting more than 2-3 days for the shellac to decant kinda screws up my schedule. Dunno if this matters, but I plan to pad on the shellac.

Thanks!

Re: Is this shellac with wax?

#2

Re: Is this shellac with wax?

Jesse Cloud

>I would call LV customer service to be sure.

Re: Is this shellac with wax?

#3

Re: Is this shellac with wax?

Larry Clinton At Frankfort (Central)., Indiana

>Normal shellac does contain wax. Unless otherwise specified all shellac products will have wax IMHO. As far as use, I use standard orange shellac with wax quite often. I see no detriment in using it on your project at all. I have heard some say the de-waxed is more water resistant, I have also heard some say the opposite. I and my son milled and finished all the white oak trim in his house - including baseboards, window & front door casings and trim and ceiling cove. All was finished in orange shellac - I have purchased from LV, but found a site in NY where I could purchase in 10 lb quantities much cheaper. (The LV is an excellent product, just at a higher cost). I would use the shellac as is, it should pad on very well and produce a fine finish.

Re: Is this shellac with wax?

#4

Re: Is this shellac with wax?

David Yoho

>Chris, as long as you're applying this shellac over bare walnut, there should not be a problem at all. Go for it!

David

Re: Is this shellac with wax?

#5

Jim DeLaney, Austintown, Ohio

Re: Is this shellac with wax?

Jim DeLaney, Austintown, Ohio

>It probably does have wax in it - unless it was specifically marked "De-Waxed."

Using it as the final/only finish is just fine, though. About the only time the wax might be a problem is if you try to put poly over it.

I use garnet shellac on walnut and cherry all the time. It's my favorite finish, in fact.

Jim D.

Re: Is this shellac with wax?

#6

Re: Is this shellac with wax?

Dick Coers

>You might want to try a little on a piece of scrap to make sure it is still fresh and dries okay. From what I understand, flakes have a shelf life. Not nearly like mixed, but it still does. If that looks good, I would strain the mix and have at it. Should look great.

Re: Is this shellac with wax?

#7

Re: Is this shellac with wax?

Al Stokka - Cambridge, Iowa

>While I'm not smart enough to fully answer your question about using non-dewaxed shellac, I am smart enough to save posts by others who are.

From a post by the late Sam Simpson (a wealth of finishing knowledge and greatly missed), March 29, 2005, 6:47 PM:

"You ask a few questions about the nature of shellac and when to use what types. My feelings are that dewaxed shellac should only be used in the instances where it is being used as a barrier. In instances where shellac is being used as the finish film, it is far better to have the full content of the product. So much so that I believe the more refined the product, the less use it has as a long term finish. This is because the refinement of the product removes from it many of the elements which serve to create a flexible and durable film. Shellac can be coerced into solution in a number of different vehicles, and several new products are appearing on the market that are doing just that. This is being done to create specific product which answer a specific need. As a very conservative finisher, my thoughts are, if you don't know you have a specific special need, then you don't have a specific special need."

I'd not use dewaxed shellac as a finish coat. Save it for use when a barrier is needed.

Al