Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

I think my PC 333 is dying

Posts

I think my PC 333 is dying

#1

I think my PC 333 is dying

Tom Sontag - St. Louis

>For a few months now, the rare times I reach for my random orbit sander have been an adventure. The motor starts very slowly and takes dozens of seconds to actually get up to full or near-full speed. My shallow level of knowledge of things electric did not comprehend this; I kind of thought electric motors of this type were either all or none.

Recently I took things apart and vacuumed some dust off coils and so on, but there has been no change in performance (with sanding pad on or off). Last time I gave up when it ground on and hummed slowly for over 30 seconds. The brushes look like they have plenty of length left. Any ideas what could be going on here? As far as I know, I have not let any of the smoke out. Yet. But I think it wants out soon.

Re: I think my PC 333 is dying

#2

You might try...

Kent in Emmaus, PA

>cleaning the commutator down to clean copper. Fine sandpaper is probably the right way to do it, but scraping with a knife works in a pinch.

Kent, who was briefly the hero of the Habitat jobsite after I resurrected a failing sheetrock router by this method.

Re: I think my PC 333 is dying

#3

More than likely the bearing are bad

Dave Smith, Longview, WA

>

Re: I think my PC 333 is dying

#4

fixable?

Tom Sontag - St. Louis

>

Re: I think my PC 333 is dying

#5

Re: I think my PC 333 is dying

Barry Irby

>Tom, The bottom bearing in mine wore out. Literally fell apart. I went to an auto supply place and bought one. Apparently theirs was miss-labeled and it did not fit. Ended up buying won from an Internet site (Google PC parts). It was an easy fix and the part was cheaper on line than locally, but the shipping ate up the difference.

I needed mine so I went to Home Depot and bought a new one. They have changed them, they are now 334's (I think) did not like the new one. Made in China and it appeared to be much more cheaply made than the 333. Also, I have a shop vac hose that fits mine and then new one had a larger oval shaped port. Took it back and demanded to buy the 333 that was on display at a discount. Then the part came for my old one and I fixed it.

I can imagine that a bad bearing would bind the machine and make it appear the motor was bad, but I don't know.

Re: I think my PC 333 is dying

#6

Get the number off the old bearing *LINK*

Dave Smith, Longview, WA

>Go to a local bearing house or order one from McMaster-Carr.

Good luck.

Dave Smith

Did some carving and no blood, its a miracle in Longview, WA.


McMaster-Carr