Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Images are now fixed...

Posts

Images are now fixed...

#1

Images are now fixed...

Felix B

>Good afternoon everyone,

It's been awhile since my visits to WC � many-many reasons: moving, working, woodworking...

Anyway, to make a long story short - I finished a project that I've been building since February... I am posting few pictures just to give you an idea of why I had no time to be here :) I'll have a more-detailed write up for the shop shots in a week or so...

Now credits: WOODCENTRAL was a major source to answer all my design, construction, and all other 'how-to' questions for this project. Thank you everyone! Thank you Ellis and your gang for making it (Woodcentral) possible, you guys rock!

The materials are cherry, cherry veneered plywood (sequence matched) and poplar. The finish is 10-12 coats of General Finishes High Gloss Oil & Urethane (whiped-on). One of the goals of this project was to keep the construction detail level to the minimum, so attention can be on wood grain.


img

Re: Images are now fixed...

#2

Serpentine Front Desk - couldn't do it without WC!

Felix B

>The top and sides of the pedestals is made out of 3/4" furniture quality cherry veneer plywood (was not an easy task to find book/sequence matched cheets). The corners of the cabinets, leg bases, and edge around the top is solid cherry.


img

Re: Images are now fixed...

#3

Serpentine Front Desk - couldn't do it without WC!

Felix B

>Another level of difficulty was added by having fronts of the drawers veneered so the grain is vertical. Vacuum press and bendable plywood (some call it italian poplar) were used to acheive the curved fronts.


img

Re: Images are now fixed...

#4

Serpentine Front Desk - couldn't do it without WC!

Felix B

>This desk has 7 full extension drawers with the slides installed under the bottoms of the drawers. All drawers are dovetailed (for the strength) although the beading was added around the edge of the drawer fronts to cover the layered plywood edge and make drawers to stand-out a bit.


img

Re: Images are now fixed...

#5

Serpentine Front Desk - couldn't do it without WC!

Felix B

>I ended up mitering the top's two corners to give it a "safer" look and feel..


img

Re: Images are now fixed...

#7

Gorgeous! Well done!!!

Charles R. Smith from Victoria

>

Re: Images are now fixed...

#8

JL

Re: Very nice...

JL

>I don't want to know how long it took!

Re: Images are now fixed...

#9

Beautiful!

Jennifer@Indy.USA

>Felix, this desk is stunning. The details are wonderful to look at. What a great job you've done on this piece that will last a lifetime and then some. Thanks for sharing it with us.

Jen

Re: Images are now fixed...

#10

Superb!

Bruce, a MN Galoot

>You did an outstanding in every aspect of this work. Congratulations on a job very well done!

Bruce

Re: Images are now fixed...

#11

Alan Young

Felix--Great detailed effort!

Alan Young

>You left "The Box" but didn't go overboard. I like the mystery behind the drawer fronts. That bead detail is very effective.

Thanks for posting the pictures.

Alan

Re: Images are now fixed...

#12

Nice Joinery

Mark Mandell - Gone Round In Jersey

>Next time show the dovetails.

I didn't have the patience to apply 10 coats of anything by hand; mostly the reason I went to spray finishing. |;-}}

mm

Re: Images are now fixed...

#13

Beautiful accomplishment!

Jim Dillon

>Felix,

I agree with your approach to minimize the details in order to show off the wood but even the limited detailing you chose is very complimentary to the overall piece. I would be proud to have made that desk. Thanks for posting. Oh, be sure to sign and date it!

Jim

Re: Images are now fixed...

#14

Felix, this is gorgeous!

Joanne Adler in Pt. Pleasant, PA

>I've missed your posts and beautiful work this year. But with such a fine accomplishment to share, your absence is understandable and forgiven. I may have missed it somewhere in your post, but is this desk for yourself? A family member? Or a commission? Whoever gets to sit at it is one lucky person. It can't help but inspire him/her to be creative and happy.

Re: Images are now fixed...

#15

Re: Images are now fixed...

HC Sakman

>Very nicely done Felix. Fantastic looking work.

Who says fine furniture can't be done with plywood?

I also like the design as well. Excellent.

Chico...

Re: Images are now fixed...

#16

I love beaded edges

Mike Farinella

>Nice work!

Re: Images are now fixed...

#17

Re: Beautiful! I second that!

Ken Garlock, Collin County Texas

>