Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Wood floor finishing??

Posts

Wood floor finishing??

#1

Wood floor finishing??

Tom Sweeney - Coatesville, PA

>I just want to make sure I've done things right before I put on the final coat of minwax high build poly & screw up all my hard work.

This is the first time I've refinished hardwood floors so bear with me.

I have drum sanded, dark stained & put the 1st coat of high build poly on my floors. As per the instructions I sanded after the 1st coat of poly. I rented a rectangular orbital pad sander & used 150 grit screen with a red pad behind the sanding screen. 150 was the finest grit they had & the rental guy said it would be fine. After sanding I wiped sown the whole floor with mineral spirits & then followed up with dry rags. Even after the cleanup there is still alot of cloudy white haze on the floors that won't wipe up.

I'm assuming the 2nd coat of poly will fill that all in & it will look fine, but I wanted to make sure before I did it. Will the fresh poly coat be OK applied with the white haze still there?

Thanks for any help - I want to put the poly on tonight if it's OK to do so.

Re: Wood floor finishing??

#2

Re: Wood floor finishing??

Mike Fitterling

>If the white haze won't wipe up then you are just seeing the scratch marks from the sanding. They will go away when you put your final coat on. And, yes, 150 grit is fine for floor finishing. I usually put 3 coats on. Remember to not put furniture or heavy objects on the floor for about seven days, when the poly will be full cured. You will be able to walk on it, however, next day.

Cheers,

Mike

Re: Wood floor finishing??

#3

Re: Wood floor finishing??

Bill Tindall, E.TN

>A floor is not the optimum place to experiment with an untried finishing schedule. You could hope that the rental place is offering sound advice and forge ahead. That said, I have always sanded in between coats with 220 grit on a floor and at least 320 on furniture and have never seen this white haze you encountered. Also I have always used a thinned, not high build, coat as the first coat to get good penetration into oak pores.

Re: Wood floor finishing??

#4

Re: Wood floor finishing??

Tom Sweeney - Coatesville, PA

>Thanks Mike - I'm going to try & clean it up some more then hope for the best - still like to hear of any other thoughts on the subject

Re: Wood floor finishing??

#5

Re: Wood floor finishing??

Tom Sweeney - Coatesville, PA

>Thanks Bill,

The finishing schedule is right off Minwax's can & we called Minwax helpline first. The problem was that they recommend using a marroon buffing/sanding pad & 2 different rental places said they don't carry those. The first coat of high build looked beautiful & flowed on real nice. I'm not positive what the wood is, but it's not oak or any species with a lot of pore/grain in it. I think I might go back over it with a handheld orbital pad sander & a finer grit paper then clean it with mineral spirits & see how it looks. I was really hoping to use 220 grit, but as I said they didn't carry it.

Re: Wood floor finishing??

#6

Re: Wood floor finishing??

Andy Halterman: Switches and coal lumps

>The maroon pad is roughly equivalent to 320 grit paper. It's scotchbrite or whatever 3M calls it. You are going to see a fair amount of white "haze" as you call it using 150. The marks should fill in fine but try using something finer before your last coat.

Andy Halterman

Thinking about what I want for lunch in Hendersonville, NC�

Re: Wood floor finishing??

#7

Re: Wood floor finishing??

Jim Dillon

>Tom,

My guess is that you are just seeing the dull surface left from your sanding and it will go away when you put your next coat of finish on. I LIGHTLY sanded the first sealer coat of PU on our hardwood floor to 220 grit with my ROS using stereated sandpaper IIRC and then just vacuumed and tack-clothed real well. The surface was indeed dull looking after sanding, but fine after the next coat.

Jim

Re: Wood floor finishing??

#8

Finished Floor

Mike Fitterling

>Here's a pic of our heart-pine floors, which I did a couple times--first when we pulled all the carpet up when we moved in and second after Hurricane Charley. I don't think it is necessary to go beyond 120 grit, but it certainly won't hurt. This was sanded with 120.

Cheers,

Mike


img

Re: Wood floor finishing??

#9

Re: FWIW

Mark Mandell - Gone Round In Jersey

>Tom,

When I did the oak floors in our foyer and living room, they were in fairly good shape, and didn't need to be drum sanded. I went to the rental joint and got a floor buffer with the synthetic disposable pads. Was just enough abrasive to cut the old shine. Then applied two coats of satin oil poly, rescuffed in between.

mm

Re: Wood floor finishing??

#10

Re: FWIW

Tom Sweeney - Coatesville, PA

>Hey Mark - How ya been? Thanks for the response. My floors were horrible to start with - big divots & scratches. I probably sanded 3/8" or so & there were still low spots & divots in them. I'm just telling everyone that they are custom hand scraped antique floors

;-) I will say that the drum sander is not an easy tool to master & it's hard to keep from putting divots in the floor. The orbital pad sander was much easier to use & would have been fine for the between coat sanding except the screen was too coarse.

We put the 2nd coat of Poly on & it seems to be fine!

Re: Wood floor finishing??

#11

Re: Divots

Mark Mandell - Gone Round In Jersey

>Hey Tim, NTBFOG

About two weeks after I refinished my floors, the waterheater in the basement let go. The plumber and crew brought the new one in a box and hand truck; all went well. Then they pulled the old one out. Hand truck? Nope. Box? Nope. ANY PROTECTION for the newly refinished wood floor that they complemented me about? Nada. Result? A 1/4" deep gash for 12" across the floor until SWMBO yelled at them to stop! "Geez, sorry, Mame. Didn't see that leg hanging."

That was the last time the DB crossed my door step!!

Enjoy your floor. Don't forget to let it cure for a week or so before putting stuff back on it.

mm