Re: What router,table and raiser to buy
NickB
>Paul,
I think it is, in part, a balancing act between your time and your checkbook. I'm currently using an old 1 3/4 HP PC router in the PC aluminum router table, and am going to upgrade at some point, hopefully soon, as I've got a wainscotting project in the works. I ballpark priced buying everything for a system that allows for quick above the table bit changes (Woodpecker QL lift, table, legs, fence (Superfence), and Milwaukee 5625 router), and it comes to about $1K (yikes!).
If you've got more time, you could save $100 or so by making your own table, and maybe another $100 by making your own fence. Woodpecker recommends steel supports for their router tables, but you could build something pretty good out of 3/4" birch ply and save another $100 or so. Then, if you don't mind pulling the router out of the table to do changes (and adjusting height from below the table), you could mount a Milwaukee 5625 directly to a router plate and save $200 or more (Pat Warner suggests this on his website).
If you like your current 3 HP router, depending on the availability of your time and your tolerance for messing around with things, you can figure out a way to mount you current rounter to a plate and set it up for adjusting under the table.
Personally, I like the Milwaukee 5625 a lot (I have one I use for handheld work right now)-the smooth start works well, it has plenty of power, and the depth adjustment is superb. I like the idea of the Woodpecker QL lift for ease of use and not having to haul a big router out of the table whenever I want to change a bit (although those guys with that router show that I see on DIY every once in a while don't seem to have any problem with it). The Superfence is a good, basic fence that works with the Woodpecker table out of the box (I like what I've seen about the Lee Valley fence, but I don't know that it would work as easily with the Woodpecker table). I'm planning on buying the legs because I'm not willing to spend the time to build a cabinet (a shop-built cabinet would almost certainly work better than steel legs, but building the cabinet takes time away from actual deliverables).
Hope my thinking helps you with yours,
Nick