Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Need a recipe for a glaze

Posts

Need a recipe for a glaze

#1

Need a recipe for a glaze

Roy Anderson

>I'm trying my hand at antiquing a new table and I heard applying a glaze is a good way to fill in the corners so it looks like years of wax buildup. I need a good recipe.

It's a mahogany table and I think I will try to bring out the mahogany color using lye as described in one of the articles here in articles section, but I will probably want to tone it back and antiquify the color somewhat.

Any help appreciated.

Re: Need a recipe for a glaze

#2

Re: Need a recipe for a glaze

John Pappas

>Roy, here is one that I tried.

Linseed oil 3 parts

Varnish 1 part

Mineral Spirits 2 parts

Artist oil color as needed to get color density you want.

Any pigmented stain can be used as a glaze, particularly a gel stain. Be sure to let it dry thoroughly before topcoating. Could take several days. Experiment a bit with the formula, or a gel stain.

Re: Need a recipe for a glaze

#3

Re: Need a recipe for a glaze

Tony - Memphis

>I have used gel stain and gotten real good results with it. There was an article in FWW fairly recently I think that gave some tips on making a glaze with oil paints. You can probably find it at their site. I bought a few tubes, but I haven't tried it yet. I think one tip they gave was to use artist's oils to tint clear poly gel - basically the same as a gel stain, but you make it the color you want.

Mahogany is my favorite wood. I haven't tried lye. I am usually going for the "18th Century" look and I have beebn using Lockwood water based dye stain to get there. I use one of their reds followed by a brown (can't recall the names) and I have been real happy with the results.

Anyway, good luck with your project. Let us know what you find and how it turns out.

Tony