>My question to the group is about storage under work benches. My current bench is whipped and racks quite a bit on its short axis. I'm planning on building a new one, built to last and be my last one, and was thinking of putting drawers underneath it. Was curious how others with this arrangement like it. Do your tools move around at all if say you are power sanding on it. Is it something to consider or would dedicated tool storage be a better way to go.
>I don't have drawers under mine - but thats because I built lots of cabinets near it. I did build a shelf to go across my stretchers. I have my planer and my dovetail jig sitting on it - as well as some assorted odds and ends.
>I think it's a great idea myself and something I want to do when I can find the time. For one thing, a case of drawers for storage will add considerable weight to your new bench, which will add mass and make it harder to move when you use hand planes and such. Another thing that it does is locates tools you use more often at your bench close at hand.
Probably the other reason I haven't done this yet is due to the small size of my shop. I don't have to move far from my main bench to retrieve tools I use there. I was thinking just the other day that if and when I had a larger workspace, I'd probably need storage under my bench right away.
I built one based on a nice article in FWW (mine is far less fancy though)and really like the convenience and the great utilization of shop space. Here is a pic. I used well-waxed locust runners for the drawer slides and am amazed how easily the drawers slide even loaded with tools.
>Doug I've been robbed a few times over the years so my bench has locking doors and shelves. All my easily pawned power tools are stored under there and locked up. Of course there is a chain saw and axe not real far away but hopefully this will be a deterent.
>Doug - I built my bench about 4 years ago and waited on the drawers for awhile to see how I would use them. Since I put them in, I don't know how I got along without them. Planes, marking instruments, dovetail saws; lots of small tools right where I need them. It's a great idea. It also adds a significant amount of mass to the bench.
>I have a small shop so I never considered not putting drawers under my bench. I love 'em. Very convenient. I built mine as a separate cabinet that sits within the bench frame. Used some nice cherry so I'd have something nice to look at.
>When I built my bench I built it with drawers. I couldn't seem to keep the drawers shut so I would have to clean out dust and chips periodically. The drawers were built as a unit and not as a structural part of the bench, so I took them out and installed them in wall cabinet. The bench now has a shelf and that is better for me.
I built a case of drawers for my bench, and I am, very happy with them. My bench is very heavy, so I get no vibration using either power tools or hand tools - the stuff in the drawers doesn't move around. I worried about how to keep the drawers closed, so I used self-closing Accuride drawer slides. They work great and keep the drawers closed so they don't fill up with shavings/chips etc. Here are two photos:
>That was the main thing I was curious about. Right now I have planes and chisels one place. Marking at another, small hand tools at another and was hoping to get things more centralized, but didn't want to have them moving around say when running a sander or chopping a mortise. Those are the two things that I think would transmit the most as far as vibrations goes. Just noticed from a lot of peoples benches at this site and others that drawers seem to be used a bit and was looking to see how everyone likes that arrangement. It definately would make things easier as long as the tools and sharps are safe. thanks Doug
>Getting your hand and layout tools together in a handy place is a real help. That's what I use my bench drawers for. I have chisels, small planes and miscellaneous stuff in the left bank of drawers and marking/layout tools and bench hardware in the right bank. The one thing I wish I'd done was to make one of the bottom drawers deep enough for bench planes. I didn't, so I keep them on in a wall cabinet near the bench where they are still handy. My tools don't rattle around the drawers when I'm pounding on the bench or using power tools, but they do move some when I open and close the drawers. I've added dividers to keep my chisels separated, but I haven't found them necessary for other stuff. They look nice, though -like I'm really organized - so I might put some more in anyway just for looks.
>my work bench weighs about 600# empty and when I put all my planes chisels sharpening stones layout tools drill indexes and assorted usefull tidbits it is over half a ton nothing moves even when I am doing the most dtressfull planeing of boards. I worry more when I am riping boards than any thing because the 4 TPI hand saw can get some vibrating going but nothing moves
>I had some cabinets/drawers under my bench but removed them. I didn't like tools stored under my bench and the drawers were more trouble than they were worth. Now I have just a couple of shelves.
Consider the Roubo bench - no overhang, no drawers *LINK*
Nathan
>I have drawers under my bench and find that, while useful for storage, they tend to get in the way when I'm clamping something to the benchtop.
Obviously, this is because the overhang along the front of the bench is not deep enough.
One thing I had not previously considered was the (for me) revolutionary idea of having NO overhang at all. (Incidentally this also means no drawers.)
This idea came from a Woodworking Magazine (Autumn 2005 issue) article on the Roubo bench (Roubo was an 18th century French woodworker who wrote a treatise on woodworking, including diagrams of his bench). It was eye-opening. The Roubo bench has the top flush with the front legs (no overhang) to allow for clamping boards to the legs and to a "sliding deadman" for working on the ends or edges of workpieces. This is something I've always wished my bench could do and it was great to see how a bench designed in the 18th century addressed this problem.
Here's a link to the Woodworking Magazine weblog with a picture of the Roubo bench. Hope it gets your grey matter moving as much as it did mine.