Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>Good Morning

17 Dec 2007

Woke up to a brisk temp outside and a woodstove that was needing wood this morning.

This week is the last full shopping week you have before Christmas day!!! I hope all of you are about as ready as you can be by this time of the year.

Most of my time this weekend was just helping a couple of local woodworkers get some things done while learning more about woodworking. But I did get one cutting board done that is already sold and spent most of my time helping them.

Today it's off to take my oldest son for oral surgery and just the emotional stress about this has been pretty hard on him....so today, mom and dad both are going in support of him.

I hope each of you are healthy and prosperous. Peace and blessing to each of you over this 2007 holiday season.

So what did YOU do this weekend?

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments.....

#2

Shop time; edited bookmarks.

Rod Peterson -- Ormond Beach

>Last first, I reduced the number of links in my bookmarks by one—excising what has become an evil empire. So, I'm no longer banned—I'm liberated. The whole affair was a surprise and disappointment, but I have learned on the back channel that my experience isn't isolated. Sad, really.

The happy note is I finally got the DC hookup (quick disconnect) for my planer configured the way I wanted (and better than I expected). I also took the opportunity to adjust the infeed and outfeed tables, which hadn't been done since I bought it. I then planed a chunk of 5/4 poplar for some door casings—filling the 32 gallon garbage can I use as the separator. Sweet.

Later, I went to turn on the DC to do some sawing and it wouldn't start. I took the switch apart and found it was not only a pretty nice switch, but easy to work on. I burnished the contacts (DPST, so four of them) with a pencil eraser, blew out the insides with air, put it back together, et, voila, I'm back in business.

In fact, every major tool got fired up except the lathe (and I had used the mini last weekend). Sure is fun running my machinery after a pretty long dry spell.

Happy holidays to all.

Rod

Re: WC Weekend Accomplishments.....

#3

Woodturning bootstrapping process completed

wilbur

>I've been trying some woodturning here and there, and decided to make bottle stoppers for Christmas gifts for some coworkers. I did some practice runs on scrap, and I realized that the chuck jaws I had were not ideal for this job, so I ordered some new jaws for my chuck. I was also using some old turning tools that I got with my old lathe, and I quickly decided that were not going to work -- they were carbon steel turning tools, and I had been practicing on 2x4 material, but I was losing the edge just from the friction when turning harder woods. I considered making bottle stoppers out of 2x4 material, then thought better of it and bought some turning tools from Doug Thompson (1-1/4" and 1/2" skews, 3/8" spindle gouge, 1/2" V-groove bowl gouge, and 1" scraper). They come unhandled. So I needed to make some handles. I looked up info on making handles, and found that I would need a 1" ferrule. Made a trip to the local plumbing supply house. I wanted to use some white oak I had for the handles, which the aforementioned carbon steel tools weren't going to do well with. Had an interesting experience making a handle with an unhandled 1-1/4" skew chisel. I found that I needed to drill a 5/8" hole for the skew chisel, but didn't have a 5/8" bit. Quick trip to the Borg. Finally got a handle made for the skew chisel, and used it to make a handle for the 3/8" spindle gouge.

Now I can finally make some bottle stoppers. Whew!

Re: WC Weekend Accomplishments.....

#4

Re: WC Weekend Accomplishments.....

Jay St. Peter - Southern, MD

>The garden bench project is coming together. A little final sanding and drill some holes for screws and it will be ready for finish. Hopefully that will all get done tonight and first coat of finish tomorrow. I'm supposed to deliver on the 22nd, but might have to hold off until Christmas day to get the number of coats of marine varnish I desire. At least it appears I'll get a Christmas present project delivered before March this time.

Jay

Re: WC Weekend Accomplishments.....

#5

built a ridiculously large birdhouse.

Mike Schwing from Md.

>I should post pictures of it. The damned thing is more than half as tall as me. We have lots of pileated woodpeckers in the woods here, and Mrs. Schwingding wanted a house to attract a pair. Good lord they need a big house. I'm going to have trouble dragging it up over 20 feet where it needs to be mounted. The entrance hole is 4" wide! My bet is that one of the screech owls gets to it first, but thats OK, too.

Fortunately I had torn down a pallet made from red oak recently, was able to use mostly that, but also used some $1/ft. cherry that I picked up along the way as well.

Re: WC Weekend Accomplishments.....

#6

Re: WC Weekend Accomplishments.....

George@Colonel's Workshop-Havertown, PA

>Good Morning Dennis and a Happy Monday,

Nit noi stuff was all I did in the shop this past weeikend. I received an order for two walnut fife racks from a friend who sells them and other things on his web site. I fabricated one rack before he ordered the other. Then I gave the replacement dining chair legs the final coat of wiping poly. The new legs match the old QSWO chair really well, and the restored chair will be on duty for Christmas dinner. My #2 son came over yesterday with his family for our party and to give me a haircut. Eddie is my barber who works full time as a financial analyst. I cleaned the shop first having kept his alergies in mind. Now I've got a clean shop to get messed up again. Have a great week.

George

Re: WC Weekend Accomplishments.....

#7

Re: WC Weekend Accomplishments- White Oak Signs

Greg Haugen

>Well, it wasn't this weekend, it was last-does it still count?? I finished two signs, one become my Secret Santa Exchange. They're white oak, 10" wide and 7" tall. I don't use templates, freehand routed while following a design I transferred to the wood with Carbon Paper. Only routed, no carving hand tools. These are a new project for me and they're alot of fun.

Greg


img

Re: WC Weekend Accomplishments.....

#8

2nd White Oak Sign

Greg Haugen

>Second Sign.

Greg


img

Re: WC Weekend Accomplishments.....

#9

Cargo!!! Ha ha!

Bill Hylton

>No accomplishment on my part, but I found a carton the UPS man left leaning against the mailbox post ('cause he didn't want to risk driving up our snow-covered driveway). Inside the box?

Several hot-off-the-presses copies of the paperback edition of Illustrated Cabinetmaking. New cover design but exactly the same book Rodale first published in 1998 (shortly after handing me walking papers and suggesting I not let the door hit me in the behind on the way out).

Now you won't need to spend 50+ bucks for one on e-bay.

I don't get anything out of it, but the new publisher, Fox Chapel, was nice enough to give me a few copies.

Bill

Re: WC Weekend Accomplishments.....

#10

Love the book Bill...

Dennis E. Peacock

>I've always enjoyed your publications. Think a lot of them and I have a nice collection of WW books. Thanks for all you do to help those of us that need help along the way.

Dennis

Re: WC Weekend Accomplishments.....

#11

Ooh, ooh! I know where that sign is!

Joanne Adler in Pt. Pleasant, PA

>Very happily hanging in my kitchen now! Boy, did I have a nice (and talented!) Secret Santa! Thanks again, Greg.

Re: WC Weekend Accomplishments.....

#12

Re: Cargo!!! Ha ha!

David Yoho

>I have the original Rodale copy in my library, Bill. Great book!

David