Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Spray Finishing

Posts

Spray Finishing

#1

Spray Finishing

mdclor

>Good evening,

I am getting ready to outfit my new shop and want to include spray finishing. I intend to only use WB finishes. My experience in this area is extremely limited. I am considering an IR SS3L3 compressor and would like to include a line filter/drier and automatic drain valve. Can anyone point me in the right direction in terms of suggested components and suppliers. Probably more questions to follow. Thanks in advance to all,

Merle

Re: Spray Finishing

#2

Re: Spray Finishing *LINK*

Carol - now in NC Nebraska

>Jeff Jewitt

Homestead Finishing

One stop information and shopping.


Jeff's site

Re: Spray Finishing

#3

Re: Spray Finishing

mdclor

>Hi! Carol,

I have been perusing Jeff's site and haven't been able to find the answers to these questions. I had a link to an air compressor tutorial, but now I don't see it on the page that comes up. I thought it was by Forest Addy, but I haven't been able to locate it in the archives on the various sites.

Thanks,

Merle

Re: Spray Finishing

#4

Re: Spray Finishing

Clint Searl, at the base of Haycock Mtn

>I have the IR stationary 5hp 2stage 80gal upright, and it's a great unit. Buy through an industrial distributor rather than a retailer. The same appearing units are manufactured to different specs. The distributor can also provide the right filter and water separator and maybe the plumbing. There's a recently developed piping system of aluminum tubing and compression fittings that looks to be superior to copper or iron. It's called "Smart-Pipe" from Kaeser.

Clint

Re: Spray Finishing

#5

Re: Spray Finishing

mdclor

>Clint,

I thought that Northern Tool had the best price, but your post makes me wonder if their machine is manufactured to their specs and therefore isn't comparable to the same model from other sites. The smart pipe is really appealing to me since I am not great at sweating joints. I will check on the pricing.

Thanks,

Merle

Re: Spray Finishing

#6

Re: Spray Finishing

Carol - now in NC Nebraska

>Check your email.

I attached the tutorial for you. I hope it is the right one.

Re: Spray Finishing

#7

Re: Specs

Mark Mandell - Gone Round In Jersey

>Think your information in incorrect on the "detuned" product lines at IR. I bought my ss3l3 from Northern and the pump went bad in the warranty period. IR sent a tech out to my house to do the repair. I asked him if there was any diference in models and sellers. He said other than some retailers won't carry the smaller IR line because of lack of demand, all parts are interchangeable. There's no expensive industrial grade in one place and a cheapo spec compressor at a discounter. They make compressors for others that may be built to different specs, but if it's got the "IR" name on it, it's all the same quality.

Re: Spray Finishing

#8

Re: Spray Finishing

mdclor

>Carol,

I haven't read it yet, but I am certain that it will be well worth my time reading it. So much to learn, so little time.

Thanks,

Merle

Re: Spray Finishing

#9

Re: Spray Finishing - glad I could help!

Carol - now in NC Nebraska

>