Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Performax 22-44 Plus Drum Sander- Adjustments

Posts

Performax 22-44 Plus Drum Sander- Adjustments

#1

Performax 22-44 Plus Drum Sander- Adjustments

Russ Miller

>I just bought a Performax 22-44 Drum Sander. Setup went fine, but adjustments are a different story. Does anyone have a good technique for adjusting the drum parallel to the table? I have made numerous attempts using the Jet instructions and when tightening the 4 bolts the drum goes out of parallel with the table every time.

Re: Performax 22-44 Plus Drum Sander- Adjustments

#2

Re: Performax 22-44 Plus Drum Sander- Adjustments

Brian MacDonald - Olympia, Wa

>I found this a while ago and he's got some good info on adjusting the Performax.

joewoodworker.com/performax.htm

Re: Performax 22-44 Plus Drum Sander- Adjustments

#3

Re: Performax 22-44 Plus Drum Sander- Adjustments

marc rosen

>Hey Russ,

I had an unusual problem with my 22x44. The drum was paralell to the table but the drive belt- though properly adjusted - had a seam that raised up toward the supported side of the drum as it went across the table. The local dealer got a replacement belt for me and all was fine after that.

Marc