Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

A Nice Lumber Buying Journey - LONG

Posts

A Nice Lumber Buying Journey - LONG

#1

A Nice Lumber Buying Journey - LONG

David Yoho

>With a recent commission behind me, I was finally able to commit my full take from this project to purchase some nice wood for future projects. Although I've worked with a variety of furniture hardwoods, including maple, I've never worked any of the figured maple available. Since I know of no reliable local supplier for such lumber, I turned to Woodfinder. My on-line search turned up one I was aware of but had not used due to their location. I decided to give Dunlap Woodcrafts in Northern VA a try. However, this meant a two-hour drive for me one-way!

With a three-week vacation from work at hand when I got off Friday morning at 7:00, I drove home to take care of a few things and then headed off to begin the 100-mile drive to Chantilly, VA. I planned to buy roughly 100 bdft of tiger maple. For a couple of the projects I have in mind, I knew I would need not only 4/4 stock but also 6/4 and 8/4. Two hours later my Garmin GPS landed me at Dunlap Woodcrafts' door and I was full of anticipation. Dunlap is located in an industrial park very near to Dulles Airport.

When I entered the front door, my heart almost sank, but not for the reason you might be thinking. The space was full of wood everywhere I looked but it was so small I could not imagine how they would have what I'd just journeyed two hours to get. There were two fellows talking about gun stocks as I stood there and another one acknowledged me and said he'd be right back. I figured I'd wait and see what the deal was here. In a couple of minutes the man came back and asked if he could help me. He introduced himself as Daniel. I explained I was interested in curly maple and wondered if they had any. He turned toward the back of the building and said to follow him. At this point I'm wondering where he was going because I couldn't see anything much in the direction he was heading. He led me through a doorway in the partition wall, which opened into the rear of the "bay".

As we made our way into this new space I was instantly aware there was more here than originally met my eyes. We had to squeeze past a number of stacks of rough lumber to make our way to the rear where there was a rack loaded with several varieties of rough figured maple boards. After pulling out about ten pieces, he asked what else I needed. I told him I needed some 6/4 and 8/4. He then did something that caused me even more amazement. Once again he said to follow him. He walked out the rear roll-up door and headed toward another one next to it. As we walked past that roll-up door I could see another whole bay stacked with lumber. We made our way to a third door that entered into yet another bay. It was loaded with pallet after pallet of rough lumber from floor to ceiling. He located the 6/4 stock and we selected what I wanted. Then it was back to the first bay for the 8/4. Their long 8/4 curly maple was buried beneath about four other pallets of stock and he was having trouble trying to slide anything out.

At this point another of his co-workers stopped by and asked if I needed long or short pieces from this stock. I replied I only needed short pieces for making ogee bracket feet. He told Daniel to go ahead and pull what I needed from a stack sitting there in the middle that was earmarked for gun stocks. Daniel picked out three pieces of the most drop-dead-gorgeous stock I've ever seen. After a tally of the lumber we'd pulled, I decided to get four more pieces of 4/4 stock. This brought my tally to a little more than 100 bdft. We settled up the bill and then loaded everything into my truck. Even though I was tired as heck, the drive home was easy just knowing I had all that beautiful lumber in the back.

I was fooled by my first impression at Dunlap but was pleasantly surprised soon after. Daniel was very knowledgeable and most helpful. I will certainly be returning again. Next time I plan to call ahead and tell them what I need so they can pull it and have it ready for me to check out when I arrive. It feels good to find a new supplier I feel I can trust to supply me with quality lumber and know they will make as good or better choices in my absence in the future.

As nasty as driving in Northern VA can be, it was still a good trip that I know I'll be making again. I'm looking forward to working this stock once it has acclimated itself in my shop. In the end, even though I was exhausted after arriving home and unloading my truck, it was a great experience.

David

Re: A Nice Lumber Buying Journey - LONG

#2

Re: A Nice Lumber Buying Journey - LONG

Robert R Clough - Thorncraft

>I just wish Dunlap were closer to WI. Kettle Morraine is fine, but it is definitely "Mom and Pop" compared to Dunlap.

Re: A Nice Lumber Buying Journey - LONG

#3

Ellis Walentine

I hope you mentioned...

Ellis Walentine

>...that you found them in Woodfinder. :-)

Thanks for the great story, David.

Ellis

Re: A Nice Lumber Buying Journey - LONG

#4

Is the Pope Catholic?

David Yoho

>Actually, I emailed Dunlap a note of thanks this morning and made mention of using Woodfinder.

Thanks,

David