Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Router Raizer question and my new Freud router

Posts

Router Raizer question and my new Freud router

#1

Router Raizer question and my new Freud router

David Charters (Durham, NC)

>Hi Folks, exciting times here. I scored a brand new Router Raizer kit off craigslist for $20, and I got the Freud FT2200 from Woodcraft for $130! So that's one cheap setup for a powerful router table. I have been reading all about the router raizer and just got done looking at woodshopdemos.com to see how that guy installed his (great site for those who may not have seen it). He rigged an allen wrench setup so he can engage the plunge lock from outside the router table cabinet. I had not heard of anyone else rigging their setup for engaging the plunge lock. I had just assumed that you just left it unengaged. What do all you router raizer users do? What a pain it will be to rig something to engage this thing above the table, or worse to still have to bend down and fiddle with it under the table every time I adjust the height.

As for the router, I just got it so this is hardly an informed opinion, but what a great deal on a router! 3 1/4 hp, the packaging was OK but even before I opened the box I heard parts rattling. Luckily it looks like I found all the screws bouncing around in the box. The directions are not too helpful, no information on table mounting it, but it came with a template to drill the router plate (that seemed to be somewhat off). There was no mention of the several parts bouncing around the box in the instructions. The button that allows for coarse depth adjustment is difficult to engage, but I don't think I will be using that with the router table. The handles come off easily and leave just what you need for your router table. It's variable speed with soft start. Seems like a great no frills workhorse for a router table. I'll post again when I put some miles on it.

Thanks for any comments!

DC

Re: Router Raizer question and my new Freud router

#2

Re: Router Raizer question and my new Freud router

Dick Coers------WebKitFormBoundaryqFOmq51H3saAc+aC

>I never engage the lock on my Dewalt using the router razer. It never moves, and I have a lot of miles on the setup. Also the Router Razer comes with a bunch of extra parts. Each kit is usually for several different model routers.