OT - New 3D model maker *LINK*
Joe Pack
>My son just sent me this. I gotta get one of these!
(Sorry if already posted. For some reason, my posts are not going through..."to be approved by administrator" message is popping up.
3D Modeler
Knowledge You Can Build On — Est. 1998
OT - New 3D model maker *LINK*
Joe Pack
>My son just sent me this. I gotta get one of these!
(Sorry if already posted. For some reason, my posts are not going through..."to be approved by administrator" message is popping up.
3D Modeler
Re: OT - New 3D model maker
Ray Thompson - Middletown,IN
>I don't remember quite when Z Corp brought out their modeler but the "layer" modelers have been around almost 20 years now.
Ray
Re: OT - New 3D model maker
JohnKJordan in East TN
>Those things are fun. For a decade and a half I attended the Siggraph computer graphics conventions every year and watched these technologies grow up - I remember seeing the Z-printers in action. One year you could walk up and get your face digitized with a laser scanner then take home a 3D model printed on a powder machine.
There are several technologies, I believe the powder method is one of the least expensive but capable of fine detail. You can also create models of things that can't be done with some other methods since the powder supports things during construction. At first, models from all the methods were pretty slow and crude (and all one color) but they have come a long way. My favorite to watch was a system that printed in the air with hot plastic - various vendors at the conventions would have their machines printing everything Starwars characters to cellphone cases.
Remember that such a device is very expensive to purchase and to operate but there are companies that will create a rapid prototype model from your 3D file as a service.
JKJ
Re: OT - New 3D model maker *LINK*
ScottS
>Even better: build your own! I saw the machine and some of its output at the Bay Area Maker Faire. Not knowing much about how these things work, I was pretty impressed!
CandyFab 4000