Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

cutting board repair

Posts

cutting board repair

#1

cutting board repair

Mike Schwing from Maryland

>A few months ago my mother-in-law returned to me, saddened and guilty, this cutting board I made about 5 years ago. "Someone" had used it as a hot plate and it burned - the pic is below.

After going round and round on repair ideas, I decided to fix it so she could still use it as a hot plate, and pyrographed a design into it. Took a long damned time with a pyro tool 3/32" square. Looks OK I guess. She'll get it wrapped up as an extra Christmas present this year.

First pic - the victim as delivered to me. 2nd pic - the repair, 3rd pic - up close detail.


img

Re: cutting board repair

#2

repaired 

Mike Schwing from Maryland

>


img

Re: cutting board repair

#3

Re: repaired 

Mike Schwing from Maryland

>


img

Re: cutting board repair

#4

Re: repaired

Carol - now in NC Nebraska

>Nice 'save,' Mike. I'll bet she will be thrilled.

Re: cutting board repair

#5

Ya get lemons, make Lemonade

Craig in SIlverdale

>

Re: cutting board repair

#6

Re: repaired

George@Colonel's Workshop-Havertown PA

>Good Morning Mike,

Nice save for sure, and the new dual purpose makes it all the more appreciated: its still a cutting board and now has become the conclusion of a game of Trivital Persuit. :<).

George

Re: cutting board repair

#7

Re: cutting board repair

Rob Sandow

>A couple of passes through a drum sander might have restored it to its original state.

Re: cutting board repair

#8

Re: cutting board repair

Ralph Turney

>That took me a few seconds to see what was wrong with it, not having read the text yet, I thought it was supposed to look that way. It kind of has the look of a 70's album cover...the fix look great.

Re: cutting board repair

#9

You're devious Mike!

jay in tx

>What a beautiful way to remind her of well... why cutting boards are cutting boards and trivets are useful. I hope you can wipe the sheepish grin from your face quickly after she catches the first glimpse of "the fix".

Cheers! ~Jay

Re: cutting board repair

#10

Re: cutting board repair

David Hay @ Denver

>That was my initial response as well. Any reason you didn't just sand it out? I can't imagine the burn went that deep into the board.

David

Re: cutting board repair

#11

Re: cutting board repair

Mike Schwing from Maryland

>I didn't sand it out simply because I didn't want it getting any thinner. I have already resurfaced this for her a time or two and don't want it to turn into veneer. It started out an inch thick and is now about 3/4".

Re: cutting board repair

#12

Now what you need to do is......

Barry Irby

>invent something you can make for her that she can lay on top of it to protect it. Maybe you could take a bunch of strips of wood and glue them together in some sort of pattern and sand them smooth. No wait, that's a cutting board and somebody has already invented it. How about a sheet of phenolic, or some sort of really tough glass or ceramic. Maybe even plastic. That would protect is and it will last longer. If you have sanded away 25% of it in four or five years, you will be needing to glue it to a substrate soon.

Nice save.