Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

magnetic switch auto start *LINK*

Posts

magnetic switch auto start *LINK*

#1

magnetic switch auto start *LINK*

fred in ct

>i found a thread in another forum which startled me and i thought i would share it over here. it may possibly avert an accident. i have know changed my ways and will unplug any machinery when changing blades, etc on them.


How Safe Are the Tools in Your Shop

Re: magnetic switch auto start *LINK*

#2

Thanks Fred-good thing to know!

Dean Lapinel

>

Re: magnetic switch auto start *LINK*

#3

Re: magnetic switch auto start

Bill Howatt

>Yes, this indeed can happen and how likely it is depends on the design of the starter relay contact spacing etc.

A second turn-off mechanism be it a second switch, breaker or unplugging (probably the best) is always warranted when putting fingers near parts that can start moving - blades or anything else.

Bill

Re: magnetic switch auto start *LINK*

#4

Re: magnetic switch auto start

Rick Christopherson

>Yes, Fred. The greatest issue with this jolt-starting is how securely the magnetic starter is mounted. I still demonstrate this concept to woodworkers when they come over to my shop.

When I first introduced this story about 8 years ago, I was almost lynched by mobs of woodworkers that didn't believe it. Needless to say, it was not a popular topic. American Woodworker Magazine (my employer shortly after the story broke) refused to cover the story. It wasn't until two years later (I think) that WOOD magazine finally verified the information and printed a warning.