Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>Good Morning

10 Dec 2007

Maybe you get tired of me saying this, but I honestly mean what I'm saying: I hope this finds you both healthy and prosperous. May this Christmas season bring you much joy and happiness.

I started out last week prepping stock for a neighbors kitchen table. Why I end up doing kitchen tables, I have no real idea...but seems like I do a lot of kitchen tables any more. This will be a 42" wide by 72" long Walnut table and this stuff is HARD!!!! It has air dried in a barn for well over 42 years and I shot 1 set of planer knives before I even got the stock prepared. One of these days, I need to research how I can have better planer knives in my PM 15" planer (it has a spiral cutter head in it right now).

I have finally finished up 3 Christmas ornaments and I already know that for next year I have GOT to order me a mini hollowing set of turning tools. This year it was just - drill out the ornament and put the top and bottom finial on them.

Christmas season is in full swing and I also have to go about an hour from here to pick up some FREE Cypress and Walnut that a guy I work with got from his dad's place. I like Free wood and I already have plans for some of it.

I've also be mentoring a new local "budding" woodworker, Wes Potts, in learning about woodworking and he's already completed his 1st woodworking project - an end-grain cutting board. Very pretty piece and he's already started his 2nd one and it should be finished this week.

So what did YOU do this weekend??

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments.....

#2

Major website revision, remain banned.

Rod Peterson -- Ormond Beach

>Nice, Dennis, to have someone to mentor in woodworking. The closest I have is a neighbor who made me take home a chair to repair on Friday. A caster had worn a big hole where there was supposed to be a little hole, so I turned a plug from maple, drilled a big hole in the leg, plugged it, drilled another hole, smacked the caster home (repeated on another leg which was suspect), and had it back to them on Saturday. Oops, I wasn't even thinking of that as an accomplishment, but I guess it is. Add one to each of the numbers below…

I'm still banned from another forum (I know, I know—how is that possible?), but frankly it's a matter of “they can't fire me, I quit.” Enough of that, however. What I really want to report (in addition to the planer switch modification I jump started elsewhere) is the big news about the Norm's Tools section of my website.

Can there possibly be anyone on the face of the planet who hasn't tired of me trumpeting my website? Probably not, but I think even the most callous detractor will have to agree that this is something worth talking about. It's in two parts, so I'll tease you, naturally, with the relatively minor tidbit first. Let's begin…

Earlier this year, I did a run through of all the episodes of The New Yankee Workshop for the purpose of chronicling and memorializing all of the minor tools, such as framing squares, stacked dado sets, combination squares, chisels, try squares, mallets, etc., which were never in my notice during the genesis of the Norm's Tools page. Hey, there's another accomplishment—I actually wrote a “Genesis” piece describing how the whole project came to be (yawn).

Anyway, during that run through I took the opportunity to note the presence of and destination of the field trip which accompanies most of the programs. Making those notes was interesting in itself, but a seed was planted that I really ought to do more with that information, and thus Weekend Accomplishment #1 was conceived. I wrote a brief page for each destination (>75 of them, it turns out) which includes a link to their own website, where available (saving you from having to search it out yourself), and created a link to each page from the episode page reflecting the project and destination. Of course that meant going through each of the 247 episodes to code the link. But it's done.

That may not seem like much, so perhaps Weekend Accomplishment #2 will wake you up. For as long as each of you has known me, just about, I've been sending you to my personal website, woodbutcher.net in pursuit of information about Norm's Tools. It was even an inside joke back in the Badger Pond days when Wayne wouldn't let us post a link to our own site in our messages and I got around it with a riddle. Anyone remember it?

Anyway, I got to thinking that maybe I should have an easier to remember and more relevant name for that project. So, I did a little search, found that NormsTools.com was available, snapped it up, and had the files all ported over in about an hour. It's been up since 1 December, and is already the #1 result when you do a search on norm's tools.

In case anyone has a bookmark to the old woodbutcher.net/norm.htm, fear not, as I converted that to a redirect which takes you to normstools.com automagically. All of the files are on the same host server, so you should continue to enjoy the speed and reliability to which you have become accustomed.

Well, I'm ready for a nap—how about you? I think I'll wander over to NormsTools.com and get in the mood. See you next week.

Rod

Re: WC Weekend Accomplishments.....

#3

Re: WC Weekend Accomplishments.....

George@Colonel's Workshop-Havertown PA

>Good Morning Dennis and a Happy Monday to you.

I am rapidly exhausting projects which have been "on hold" for a long time. I've taken my sweet old time rebuilding an antique dining room chair which failed to combat one of my sons' posteriors. I had to replace both back legs which meant a lot of mortising and fitting. Fortunately I was able to exactly match the original color. Most of the chair was QSWO except for the original back stiles. My replacements honored the QSWO feature. The chair now looks better than ever. However, my son will not be sitting on it from now on. A client asked me to repair a wall clock which jumped off her wall, landing on and breaking the scroll pediment. I was able to glue up the fragmented parts. Now to make the glue up invisable! I need to get some more wood, to get going on the balance of our bedroom suite. Have a great week, Dennis.

George

Re: WC Weekend Accomplishments.....

#4

Re: WC Weekend Accomplishments.....

Mike Fitterling

>Not really "weekend" accomplishments, but a recap of things done this past week: Lots of stuff has been going on this week. I delivered and finished installing base and crown on a pair of maple bookcases this week; built in, one on each side of a window, with a doored section below and open shelves above. The client was happy and I hear there is another project in the wings--a "entertainment center." Finalized "retaining" an attorney for a suit I have to file for non-payment on a woodworking job that I did this year. :( I also went to Tampa on Saturday to help a fellow woodworker swap out an inadequate subpanel for a bigger one and ran a new circuit for his new-to-him Unisaw. A friend of mine who does rustic furntiture has been using my shop for Christmas presents, and I helped him most of Friday mortising and tenoning legs and doing some fancy handcutting of compound joints where a lower shelf met the four legs of a sofa table. Also, started reading The Nature and Aesthetics of Design by David Pye, which I am enjoying and from which I am learning a lot. I also got up to the Florida Industrial Woodworking Expo in Orlando with my Friend Brian of Holbren Cutting Tools and saw some neat woodworking stuff, and where I found out I have much more options than I thought for wholesale lumber purchases; that alone making it a worthwhile drive. I also found a manufacturer of TV lifts that sell direct for about half of what they list in catalogs for. I was sick Saturday night and some Sunday, but am now back at it and ready to get out in the shop.

Cheers,

Mike

Re: WC Weekend Accomplishments.....

#5

Re: WC Weekend Accomplishments.....

Brodie Brickey

>Saturday, I went down to WoodCraft and picked up their Triton Wood Rack system that is on sale. Bought to of them and mounted them to the wall of my shop. Unfortunately for me, I have a small shop 13' x 17' so this really freed up a lot of space. I stacked up my wood and fishing rods so now I've got about 50% more space on the floor. Got the shop configured to actually do something. When its organized, I'm just so much more willing to do some work in it.

Built a sled for cutting the angled mug staves.

Sunday, jointed and dimensioned some yellow heart, bloodwood, birdseye maple, and leopardwood lumber for the Christmas mug presents. I've got 10 mugs currently planned sliced up and another 5 planned.

Still have to rip the 1/4" accent strips and create the feet.

So much to do, so little time.

Regards,

Brodie

Re: WC Weekend Accomplishments.....

#6

Allright, I'll bite what did you do...

R. Lance in GR, Michigan

>to get banned?? Openly question someone's intelligence (who hasn't been tempted to do that?)...showed some more Holloween pics??...told someone where they could put their opinion of RAS??...what??

Re: WC Weekend Accomplishments.....

#7

Re: Allright, I'll bite what did you do...

Rod Peterson -- Ormond Beach

>> Allright, I'll bite what did you do to get banned?? Openly question someone's intelligence (who hasn't been tempted to do that?)...showed some more Holloween pics??...told someone where they could put their opinion of RAS??...what??

I wish it were so obvious as all those. I apparently committed the egregious sin of pointing out that someone who had blatantly misrepresented some circumstances was clearly at variance with the facts. An apparent moderator deleted my post and so informed me on the back channel. I conceded that that was probably okay but defended my position and was unapologetic (none was requested). He wrote back some drivel at which point I cited his condescension and the other person's arrogance and told him to quit emailing me.

A day or so later, I apparently committed the even more egregious sin of posting a link to Bill Tyndall's Where Hardwood Lumber Comes From article. It seems that woodworking forum doesn't permit the posting of links to other fora even for something so blatantly useful and woodworking related. The prohibition seemingly was enacted during a lull in my activity.

I was locked out without a word and haven't heard one since. I was one of the original members, too, although with the apparent sea change that's taken place, I don't like to say that too loudly.

So, just me being me, I suppose.

Rod


P.S. Let the record reflect that I did not post the Halloween pictures. I posted a link which someone had to actively enable to see them. Over 200 people looked at the post with the link in it. I don't know how many clicked to see…at least one…

Re: WC Weekend Accomplishments.....

#8

Jim DeLaney, Austintown, Ohio

Re: Allright, I'll bite what did you do...

Jim DeLaney, Austintown, Ohio

>Welcome to the 'Banishment Club!' I got kicked off that forum - also without warning - for saying something in favor of Bill G., when the moderator was adamantly opposed to a post he'd made.

Gee - unceremonious banishment, and I didn't even say anything bad about Festool or SawStop! ;-)

Jim D.

Re: WC Weekend Accomplishments.....

#9

I consider myself in fine company, then…

Rod Peterson -- Ormond Beach

>with you and Bill. I'm informed there are others (and might be more). Sure isn't like the halcyon days of Spring, '03. Kinda makes one long for Wayne…(for the record, I never had a problem with him).

Rod

Re: WC Weekend Accomplishments.....

#10

Re: I consider myself in fine company, then�

Howard Norman

>Well I haven't been banished from that forum, at least as far as I know, but I haven't been over there in a year and a half either. I am just happy here at WC and have no desire to visit that forum again.

Howard

Re: WC Weekend Accomplishments.....

#11

Re: WC Weekend Accomplishments.....

David Hay @ Denver

>We had a bunch of snow unceremoniously dumped on us this weekend. However I did get out to the shop, despite the cold temperatures.

I was able to get the remaining pieces cut and sanded for the child's chair I'm making for my daughter. Hopefully things will warm up enough for me to assemble it soon!

Have a great week!

David

Re: WC Weekend Accomplishments.....

#12

Sat on a needle, and it didn't bend in half

Mark Nowicki

>

Re: WC Weekend Accomplishments.....

#13

Dennis, please email me ! thanks

Mark Valsi

>

Re: WC Weekend Accomplishments.....

#14

Re: Allright, I'll bite what did you do...

Ned Bulken

>Kieth at his finest, eh? sad isn't it?