Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

OT - Dual monitors

Posts

OT - Dual monitors

#1

OT - Dual monitors

Tim Greif - West of Chicago

>I recently upgraded to a new computer with 20" widescreen lcd monitor, which leaves me with a spare 17" lcd monitor from the old setup. I've heard of people using dual monitors on PCs but have no idea of the hardware or software needed to do this.

Can someone please educate me on this? I'm running XP pro if that makes any difference.

Re: OT - Dual monitors

#2

Re: OT - Dual monitors

JohnKJordan in East TN

>Tim,

I've been using dual monitors with my 3D graphics and video editing work for at least 15 years (can't exactly remeber). At that time it was very difficult with buggy drivers and expensive equipment (I spent over $5000 for my first setup.) At one time I maintained four separate dual-monitor systems in my basement studio. (photo of one side of the room below just for fun!) In later years, I moved to one set of dual monitors/keyboard/mouse switched between multiple computers - this took up much less desk space!

Note that there are many ways to configure dual monitors and many tradeoffs. I prefer configuring as one huge wide monitor with the task bar spread across the bottom, with each application that uses a single main window forced to stay within the boundaries of just one screen (no split windows). Windows and data can be freely dragged from one screen to the other. There are still some problems with apps written by people unfamiliar with duals, most notably installation routines and some error messages that pop up between monitors.

Today's OSs make dual monitors very easy to implement. Mostly, just plug it two video cards or a single dual video card. For my work, I always prefered using a dual card with monitors that match exactly. (I currently use an nVidia quadro4 card and two lcd monitors)

Since I've always used matching monitors and cards, I don't have any experience with using mismatched equipment. I understand XP is quite accomodating and plug-and-play but there may be some tradeoffs.

One thing is sure - once you start using duals you can't go back!

JKJ


img

Re: OT - Dual monitors

#3

Real easy

Mark Goodall - ATL - tooljunkie

>First of you'll need a video card that supports 2 monitors, or another video card.

If you're PC has an integrated video card (which means the video "jack" is actaully built into the motherboard) then it's only capable of one monitr and you'll have to get a second plug-in video card (which is like thos add-in cards you stick insode you coputer with the jacks pointing to the back.... like a modem, network card, video card, etc)

If your PC has a separate plug-in video card, it might already have dual-monitor output. It will either have two jacks, or will have one special jack with a Y-connector giving you two jacks.

These "jacks" I mention are either blue which is the older VGA analog monitors, or the newere white DVI digital jacks.

IF you PC has an integrated video card, it will likely have a blue jack.

IF your PC has a card, it will either be blue or white jack. If it's blue, there's like only one, if it's white there's a good chance it dual.

Please not that pluggin in a Y-connector to a video jack does NOT mean it can hanlde two monitors. If your video adapter is capable of allowing two monitors, it will either have two jacks on the back, or it would have come with it's OWN Y-connector.

So if your PC can handle two monitors, all you do is plug in the second one. Then the software that came with the video card (not the monitor) will allow you to choose how you will split/use your second monitor.

WindowsXP and Vista can also handle how the second monitor will be used, but if you've got one video card capable of handling two monitors, then their software is usually better.

If you have a computer with only one single-monitor video card, then you'll have to either get another single-monitor video card, and then use Windows to split/use the second monitor.

Or you can forget the video card you currently have, and buy a new card that can handle two monitors.

In my expereience, haveint 1 card with 2 monitors works a bit better ebcause the video apadter driver software does a good job of handle the split/use. But having two different single monitor video adapters will also work.

Hope this make sense.

Happy Woodworking!