Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

OT: Troubleshooting a pre-lit Christmas Tree

Posts

OT: Troubleshooting a pre-lit Christmas Tree

#1

OT: Troubleshooting a pre-lit Christmas Tree

Nat Robison

>I've never really replaced bulbs on a string of Christmas lights. It seemed like it was always cheaper (and lazier) to get a new string.

My problem now is that we have a pre-lit Christmas tree with one area of bulbs out. There are 6 strings on the tree. When I unplug each string, currently lit bulbs go out so I can't easily identify the string with the outage.

Is the replacing of bulbs a completely trial-and-error process?? Is there any method to it on a pre-lit tree?

Re: OT: Troubleshooting a pre-lit Christmas Tree

#2

Re: OT: Troubleshooting a pre-lit Christmas Tree

Howard Norman

>When I put up my pre-lit Christmas tree yesterday there were two areas without lights. Turns out the plugs were unpluged for those two strings. If all of the plugs are connected is it possible that there is an in-line fuse that has blown? This is the only pre-lit tree that I have any experience with so I don't know if they ever install in-line fuses on these trees or not.

Howard

Re: OT: Troubleshooting a pre-lit Christmas Tree

#3

Re: OT: Troubleshooting a pre-lit Christmas Tree

Rick in Colgate

>Our tree had the same problem. Look at each bulb of the offending string and see if you can detect any damaged ones. I had one bulb that had been mostly ripped off its base, once replaced the string was fine.

Re: OT: Troubleshooting a pre-lit Christmas Tree

#4

Re: OT: Troubleshooting a pre-lit Christmas Tree

Bill Roland (Mt Juliet,TN)

>A couple of years ago I purchased a device at the orange borg that claimed it would show when there was a dead bulb. I gave it as a gift and never got a chance to try it out. It was not expensive with the gift limit of $10. I don't know if the are still available.

Re: OT: Troubleshooting a pre-lit Christmas Tree

#5

Re: OT: Troubleshooting a pre-lit Christmas Tree

ben d.

>Get a Christmas tree bulb tester. I have 2, got one at K Mart and got a second one out of an airline gift magazine from a plane ride.

Both are slightly different but resulta are the same. They will check for a good bulb and lay the point on the wire and it will tell you if current is present.

Pretty neat and pamplet shows how to use.

ben d.