Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

High School Shop

Posts

High School Shop

#1

High School Shop

Dustmaker Mike

>We are in need of 8 cabinets to hold tools in. These must be lockable. I was thinking about making them myself, when one of my coworks suggested we use a local High School to make them for us. I called the HS near me and they have a cabinet shop class and can do the work for me. It will cost the price of materials and a small donation to the shop. I like the idea.

Now my question I was thinkikg about using Pine these will be about 2' X 4' or maybe 3'X 4' depth is going to be about 10" and the back wall will be Peg board so we can rearrange tools as needed. Will pine hold up? Or should I go with Oak? Work is paying so cost matters but not that much. They will not get any hard use just unlocked in the morning and locked again at night. They will be hung on the walls with French cleats.

Re: High School Shop

#2

Re: High School Shop

John Veerkamp

>Mike if they were on the floor pine would be fine. I'd be concerned about the weight causing them to sag if they are hung on the wall. maybe using Ply for the carcas body would prevent this.

John

Re: High School Shop

#3

Re: High School Shop

Ron Hildreth

>Mike,

You didn't say whether the cabinets will be painted or stained. If painted, I think I'd use ACX (birch?) 3/4" plywood for the carcass, and poplar for the doors/face frame. Otherwise if stained, use Oak or ? veneered ply for the carcass and hardwood to match for the doors. My 2 cents.

Ron in Iowa

Re: High School Shop

#4

JL

Re: High School Shop

JL

>If money is a consideration (and if you were painting them), I'd go with poplar as Ron suggested. Poplar plywood runs about $35 or so a sheet around here and you can get decent boards for about $2.50 or so a board foot.

Good oak plywood is a little bit more ($45-55 a sheet for red oak) and decent boards (S2S) run about the same as the poplar. My $0.02.

Re: High School Shop

#5

Re: High School Shop

Bill Hammond, Oregon Coast

>Why not ask the teacher what would be the best learning experience for the students. The kids could kick around the merits of the different materials and then make the decision. Gives them some real life experience and lets you off the hook.

Re: High School Shop

#6

Re: High School Shop

Al Stokka - Cambridge, Iowa

>I think pine will function just fine. I'd be more oncerned about the pegboard's longevity than the box, since the pegboard will be bearing all the weight of the tools. The pine (or other material) merely encloses the tools and supports the pegboard as it hangs on the wall.

Al

Re: High School Shop

#7

Thanks All

Dustmaker Mike

>I may just let the kids decide. As for the weight of tools it is just a few screwdrivers and wrenchs not real weight.

Thanks All for the Ideas

Re: High School Shop

#8

Re: High School Shop

Jeffrey D. Rose

>Check with Waterloo Industries, out of Waterloo, IA. They have a donation program for schools. I work at a university and they donated a couple really nice big tool boxes to us. May be worth a shot.

Jeff in Iowa.