Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

DC Repairs

Posts

DC Repairs

#1

DC Repairs

Mark Mandell - Gone Round In Jersey

>For any of you who have followed my posts on my DC refurbishment, from ducts to motors, here's a bit of a tip.

As setforth cronicaled below, my problems with the impeller have been fixed. But this evening I spung some time to remount the blower and est the system.

While I don't have a schmancy dB sound level meter, the repair and rebalancing of the impellor has made, at least, a 50% reduction in noise in my shop and the house. So much so that SWMBO commented by asking if the DC was on rather than complaining that it was on.

I pass this on because it will now be a regular shop maintenence item to check the impellor for dings at least every 3 months.

Honestly, the reduction in the noise level is amazing, and each of you with a DC should check your blower fan for dents and dings!

mm

Re: DC Repairs

#2

Re: DC Repairs-Thanks, Mark

Ron Hildreth

>Mark,

That's a great idea that I hadn't thought of. I'm usually pretty stringent when it comes to maintenance on my DC, but that's one thing I've been overlooking, even though I occasionally hear those larger chunks hitting the blades. Should have known better! Think I'll tear it down this morning while that's fresh on my mind. I owe ya one!

Ron in Iowa

Re: DC Repairs

#3

Re: DC Repairs. Oops?

Barry Irby

>Umm, Err, Ahh, your posts got me to thinking. I was wondering if I were the only one who purposefully sent small pieces into the whirling vortex of death and then stood there and listened while they rattled through the pipes and then pinged the impeller. Sometimes they ping more than once, apparently that first time did not send them into the bag.

What did you hit yours with? Did you say a Screwdriver? Yours must really suck. Pretty sure mine would not pick up a screwdriver, even if I tried. It has sucked up a plastic bag (or two) that got hung ans shredded in the impeller. I just pulled the hose off the top and fished out the remains. Maybe its time for a better look and to stop pinging it on purpose.