Motor - electrical - help?
Mark Mandell - Gone Round In Jersey
>Have tried every which way to get this DC motor to run or even hum. NG
Since the unit has its own switch that was always on, I'm wondering if it got bumped and broken, so I'd like to try to bypass it since the DC works off a remote switch and contactor set-up anyway.
Here's the rig: the two line hots go to the switch. Then 2 yellow jumpers go from the switch to the white and red leads from the motor with the motor's black and yellow lead wires spliced.
Here's the question: To bypass the switch, do I simply connect the hot leads to the two yellow leads?
Thanks anyone!!
mm



