Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

What'd I Do?

Posts

What'd I Do?

#1

What'd I Do?

Mark Mandell - Gone Round In Jersey

>Got my DC impellor back from the shop and reinstalled it in the blower and motor unit, plugged'er in and hit the switch . .

Duh, nuh thing in happen ning.

Cehcked the dedicated circuit . . fine.

Contactor relay is hot and humming in the "on" position.

Unit (integral) switch is "on."

Nuth-thing . . motor doesn't even hum so I have to think there's no juice getting to it.

Now, I did have the centrifugal switch off because the spring plate was making a squeeking/ticking noice when turned that sounded like a motor bearing. Cleaned the parts off with a bit of air and reinstalled the switch to the very same depth and position on the motor shaft as before.

Motor was running just fine before this so I have to think I did or didn't do something here.

Anyone got an idea?

[No, I don't have any parts left over |;-}} ]

Thanks

mm

Re: What'd I Do?

#2

Re: What'd I Do?

Thomas S Stockton

>Mark,

If you took the centrifigul switch off you might of mounted it in a different position and it isn't doing it's thing. I can't remember exactly how they work but if you take off the end housing it is pretty clear how it works.

Is it hard wired or plug in could be a loose connection someplace poke around safely with a voltage meter and see where theres power.

Tom