Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Water Base Over Boiled Linseed Oil

Posts

Water Base Over Boiled Linseed Oil

#1

Water Base Over Boiled Linseed Oil

Tomm

>I used one coat of boiled linseed oil on a few small projects and I was wondering if I could finish them with water based poly after they dry. Thanks for your thoughts.

Re: Water Base Over Boiled Linseed Oil

#2

Re: Water Base Over Boiled Linseed Oil

Rob Stokes in North Vancouver

>I'd put a barrier coat between them - Sealcoat should work well. But I'd also let the BLO cure, not just dry. It may take several weeks to do that.

Rob

Re: Water Base Over Boiled Linseed Oil

#3

Re: Water Base Over Boiled Linseed Oil

Pat Riley

>I have done this on several small items with good results. You do have to let the BLO cure for about a week to 10 days though.

Re: Water Base Over Boiled Linseed Oil

#4

Re: Water Base Over Boiled Linseed Oil

Glenn Madsen near San Francisco

>Why use the waterbase and have to wait, or use a barrier coat? Use the oilbase, and start many days earlier. And I find it much easier to wipe on, too. Quite like using the BLO you started with, particularly if you thin the oilbase poly with about 25% mineral spirits.