Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Dust Collector Parts Help

Posts

Dust Collector Parts Help

#1

Dust Collector Parts Help

Mark Mandell - Gone Round In Jersey

>Have run into a problem with my Reliant (defunct Woodworker's Warehouse brand of Taiwan) DC (2hp, # NN-820).

Seems as though dust chips and such have become unsufficient to satisfy its new-found appetite; this thing just had to suck up a No. 3 phillips screwdriver which hit blower before I could get to the kill switch. Sounded wonderful when it hit the steel impellor.

So now I have an impellor with 4 vanes seriously dinged on the outside edges and a very noisy dust collector with an unbalanced impellor. Took it to my friend at the weld shop, but he's cautious as to whether he can get things back into proper (and quiet) shape, and then I'll still have to get it spin balanced to the full 3,500 rpm. So.

This is an 11" generic Taiwanese DC blower and I'd like to know if anyone has a source for a replacement impellor? The welding shop can, of course, fabricate me one, but that'll cost about as much as buying a whole new blower.

Thanks

mm

Re: Dust Collector Parts Help

#2

Re: Dust Collector Parts Help

Ron Hildreth

>Mark,

Just might be a shot in the dark for you, but locally we have an electric motor re-winding shop. I was in there a few weeks ago, and noticed they had a pile of junk in the corner, which included electric motors attached to various things the motors powered. The most recognizable things in the pile was old fan blades. Seems people either don't know how to take the motor off before bringing it in, or don't know how. The motors are found to be beyond repair, so the whole thing is crap-canned. You'd be surprised at what these days still utilizes a metal fan instead of the more common plastic variety. Otherwise, only other place you could try would be an air-conditioning and heating place. Even if the fan measures bigger in diameter, you could cut it down, then use a lawn mower blade balancer to check for balance.

Good luck!

Ron in Iowa

Re: Dust Collector Parts Help

#3

Re: Dust Collector Parts Help

Thomas S Stockton

>Onieda used to carry replacement impellors that also pulled more air.

The other option is to look at the parts breakdowns At grizzly and see if any of theirs will fit

Tom

Re: Dust Collector Parts Help

#4

Lesson Learnt

Mark Mandell - Gone Round In Jersey

>Is don't let your movable tools get close to your DC!!

Ran down several companies who make an impellor for their own machines that "might" fit my blower housing and motor shaft,

But.........................................

They won't sell me one!

Huh?

Right. They don't want the liability of a possibly mismatched impellor and motor shaft and housing not of their own make. [Some silliness about schrapnel and stuff] I was a bit pissed, but on reflection, being the lawyer, I have to admit that I would have advised them the same way.

So I got my old fan back from the weld shop with pretty much straightened fins and it levels (pretty much) on my old lawn mower blade cone balancer. Therefore, Back In The Blower she goes, hoping that the noise won't rise to the level of a whole new DC unit in the near future.

mm

Re: Dust Collector Parts Help

#5

PS

Mark Mandell - Gone Round In Jersey

>Oh, the lesson learnt?

Dust collectors with a price tag under $2K are expendable items that will cost more to fix than to replace.

[$225 12 years ago, so what am I whining about, eh?]

mm