Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Mobile stand for table saw

Posts

Mobile stand for table saw

#1

Mobile stand for table saw

Irv

>I am looking for a design for a mobile stand to fit the Craftsman 10" table saw I recently bought.

Re: Mobile stand for table saw

#2

Re: Mobile stand for table saw

Thomas Williams Columbus Ohio

>I put my zip code Craftsman on the Woodcraft universal base. It raises the saw a few inches, but otherwise has worked well.

Re: Mobile stand for table saw

#3

Re: Mobile stand for table saw

Stuart Hough

>Wood magazine had a good design a few years ago. It is in their "Plans" section on their website. I built it for my Sears 10" portable saw and it worked great. It did such a good job that I made longer rails for it and put my Delta jointer on it when I got my Hybrid saw. Tale a look and let me know what you think!

Re: Mobile stand for table saw

#4

Barb Siddiqui

Re: Mobile stand for table saw *LINK*

Barb Siddiqui

>Shop Shots #261, from way back!

This is under my Craftsman 10" contractor saw I still use. I've added a downdraft sanding

table to the left wing of it (shop shot #343: http://www.woodcentral.com/shots/shot343.shtml)

and it's been a great cabinet ever since. The mobility and storage it gives me is wonderful.

-BarbS


Contractor Saw Cabinet

Re: Mobile stand for table saw

#5

Me Too

George@Colonel's Workshop-Havertown PA

>Good Afternoon Irv and Stuart,

I've looked thru my back issues of Wood Magazine but can't find the article. I built three of the Wood-designed mobile bases for: Jet Table (contractors) saw, Grizzly 1014Z Sander, and my 6" Bridgewood Jointer. They really work well. I cut down some left over and extra "L" frame steel bed rails to incorporate within the design for more than adequate strength. I made each of the bases from white oak, so they are very strong and give fine support to each tool. I used 3" swivel casters. Two have been in use since 1999, and the third, since '97. You should consider the current costs of good casters and bounce that off the cost of commercial bases. Had I to make a decision today, I would opt for a commercial base. I don't think I could build one myself for the cost of an adequate commercial base.

George

George