8" Grizzly jointers - 490 vs 586/593
Rob Ring
>Thinking of putting a Grizzly 8" jointer on the Christmas list. Can anybody explain the advantages of the parallelogram bed design (G0490) vs. the dovetail-ways design (G0586 or G0593). Other than an extra inch or so of length, the only differences I can see are the bed design and 2HP vs 3HP. I have to believe that the 2HP motor is more than enough juice, so I don't see a huge need for 3HP. Is the parallelogram bed design that much better to justify the additional cost?
Also, the spiral cutterheads available on each appear equivalent, yet there's a $330 premium on the G0593 vs a $470 premium on the G0490. And it actually appears about $100 cheaper after shipping to buy the G0490 with straight knives and purchase the spiral upgrade separately. Am I missing something?
One last question - a previous post on this topic stated that the spiral cutterheads on the grizzly weren't Byrd. The replacements on the Grizzly website are listed as Byrd, but it's unclear about the spiral heads shipped pre-installed. can anybody confirm whether they're Byrd also?
Rob



