Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

benchtop jointers

Posts

benchtop jointers

#1

benchtop jointers

JohnKJordan in East TN

>Until I get room to set up my 8" PM jointer, I'm considering getting one of the small benchtop jointers for light work on some puzzles and inside-out turnings. Like the portable planer, I figure I can store it out of the way when not in use.

I see Delta has one but read mixed reviews on Amazon.

Anyone have experience or words of wisdom on this size jointer?

JKJ

Re: benchtop jointers

#2

Re: benchtop jointers

Jesse Cloud

>My own experience was pretty sad. I had the Delta. Its extremely loud, no effort at dust control at all. The fence adjustment to 90 degrees slipped often - probably due to all the vibration.

I guess if you have a small quantity of short (1-2 feet) pieces, it might be worth it. I even tried making infeed/outfeed extensions - a waste of time. (Yeah, I can just see you thinking 'I wonder how he really feels about it.')

In my opinion, the best part of the whole thing was that I sold it for half of what I paid for it.

I would take the $$ and buy a decent hand plane.

Re: benchtop jointers

#3

Re: benchtop jointers

JohnKJordan in East TN

>Thanks. I talked to my local trusted woodworking consultant a little while ago who said basically the same thing. He suggested I use a sander instead. I have a good disk/belt sander in storage so maybe I'll drag that out.

JKJ

Re: benchtop jointers

#4

Re: benchtop jointers

John E

>I've got that jointer, and have used it a fair amount with good success, BUT, you can't do anything particularly long. 4 ft is probably about the max. Yes, it's loud and makes a ton of dust. Would I buy it again? Probably not, but my old shop was a converted one car garage, and it was all I had room for. Now I've good more room, and will soon be looking for a floor model. (I've also gotten a lot better with hand planes, and find myself reaching for the hand plane before bothering to pull out and set up the jointer.) Bottom line is like always - it depends on what you want to do with it. I think it works fairly well given it's inherent limitations.

My 2 cents.

John

Re: benchtop jointers

#5

Re: benchtop jointers

Chuck Lenz

>I think I'd look for a old Rockwell or Delta 39-270 4" jointer. Great little jointer for a shop cramped on space. They don't build small Jointers like that anymore. All cast iron.


img

Re: benchtop jointers

#6

Re: benchtop jointers

Kelly Anderson

>I started with the Craftsman 6" bench top jointer. It is solid cast iron where the Delta is mostly steel. That jointer did really well and was very solid. http://www.sears.com/shc/s/p_10153_12605_00921788000P?keyword=jointer

Re: benchtop jointers

#7

Re: benchtop jointers

Kelly Anderson

>I started with the Craftsman 6" bench top jointer. It is solid cast iron where the Delta is mostly stamped steel. That jointer very good and solid.http://www.sears.com/shc/s/p_10153_12605_00921788000P?keyword=jointer