Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Waste Not Want Not - Scraper Harpener

Posts

Waste Not Want Not - Scraper Harpener

#1

Waste Not Want Not - Scraper Harpener

Garrett in Victoria

>What do you do when that solid carbide 1/4" router bit snaps off? Make a scraper sharpener. The handle is a scrap of maple turned to knock off the edges but still square so it won't roll off the bench, and tapered a little toward the bit for convenience. Finish is a coat of poly.

I drilled a 3/4" deep hole in the end with a "C" letter bit that's just slightly less than 1/4", and hammered in the bit's remnant end until it bottomed.

All in about 15 minutes, and it does a great job.

Cheers, Garrett


img

Re: Waste Not Want Not - Scraper Harpener

#2

Great idea!

Art Silva

>

Re: Waste Not Want Not - Scraper Harpener

#3

Re: Waste Not Want Not - Scraper Harpener

Jeffrey D. Rose

>You stole my idea!!! lol I was just thinking of doing the same thing with a broken carbide end mill from work. Looks like it works.

Have a great weekend.

Jeff in Iowa.