Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Interesting video/awesome display of bandsawing *LINK*

Posts

Interesting video/awesome display of bandsawing *LINK*

#1

Interesting video/awesome display of bandsawing *LINK*

wilbur

>The Baltimore Sun website has a video of Thomas Brown and his shop. Thomas Brown has his architectural millwork shop outfitted with old woodworking machines -- the youngest was made in the 1930s.

The whole video is pretty cool, but the thing that made my eye pop is just 15 seconds into the video. Watch him cut a curve on a bandsaw like pulling a hot knife through butter. I had no idea such a thing was possible.


Video of Thomas Brown's shop

Re: Interesting video/awesome display of bandsawing *LINK*

#2

Re: Interesting video/awesome display of bandsawin

Keith Newton------WebKitFormBoundaryDZmgloT+ZiYFgX

>Wilbur, that looked pretty normal to me. I have a Defiance 36", which is a bit older and larger than that one, from around 1905. I can cut something in the 6 ~ 10" range that fast and easy, depending on wood density. The maximum is 16" thickness.

Mine is high-speed, with the blade speed a little over 60 mph, and driven by a 7.5 hp motor, which isn't as powerful as some I have seen. One of the shops where I get lumber has one with a 40 hp motor.

Re: Interesting video/awesome display of bandsawing *LINK*

#3

Re: Interesting video/awesome display of bandsawin

Sean Troy

>I would love to sit down and have a conversation with that guy. Do they still make a radius plane like his?

Re: Interesting video/awesome display of bandsawing *LINK*

#4

Re: Interesting video/awesome display of bandsawin *LINK*

Don in Northern Arizona

>Sean,

Yep, Kunz still makes them in Germany (see link), but you can get a Stanley from a used tool dealer or Ebay for a lot less (see pic).

Don


img

Kunz 113 Circular Plane

Re: Interesting video/awesome display of bandsawing *LINK*

#5

Re: Interesting video/awesome display of bandsawin

wilbur

>Seriously -- you usually do cuts on a bandsaw at that speed?

I've only seen bandsaw use on the various TV shows, and Norm, David Marks, and Scott Phillips all seem to take bandsaw cuts fairly slowly compared to the video I linked to. On the other hand, the bandsaws they use seem to be in the 14"-20" range, tops.

Re: Interesting video/awesome display of bandsawing *LINK*

#6

Re: Question?

Brian in Brighton

>Very nice. I wonder if the lack of these machines is due to 2 world wars consuming iron and steel so these machines were scrapped?

On that note: How many years do you think it took to put all the old WWII ships and steel back into the marketplace as scrap?

Brian in Brighton