Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

grizzly 8 inch joiner

Posts

grizzly 8 inch joiner

#1

grizzly 8 inch joiner

WRF

>This is like half the price of the jet /delta powermatics etc.

Is it a case of you get what you pay for or is this a good tool?

Not looking for nasa stuff just want to get my stock straight and flat and square.

Any body own or use this tool? Comments?

Re: grizzly 8 inch joiner

#2

Re: grizzly 8 inch joiner

Howard Norman

>I purchased the Grizzly G0490 right after it came out a couple of years ago. There were shipping problems on the first shipment which included my unit. Grizzly took care of the problem and changed their shipping procedures and I haven't heard of any problems since. It is a good well built machine in my opinion.

Howard

Re: grizzly 8 inch joiner

#3

Re: grizzly 8 inch joiner

Wayne in Atlanta

>I have a 6 inch Grizzly jointer. It's tables are as flat as my 40" straightedge across both tables. I have 14" bandsaw from Grizzly too, and the wheels were perfectly coplanar right out of the box.

I've been thinking of getting a bigger jointer, and most likely I'll buy another Grizzly. And if I move up from my 12.5" Delta planer it will also most likely be a Grizzly too.

Re: grizzly 8 inch joiner

#4

Re: grizzly 8 inch joiner

Wayne

>I have a 1021 planer that I have had for 16 years and haven't had any problems. I also have owned an 8" jointer for the same time and haven't had any problem either. They arn't as finished on the outside as the higher priced but I like them better than the Delta which I owned before these.

Re: grizzly 8 inch joiner

#5

Re: grizzly 8 inch joiner

Ken Krawford

>I bought the 8" G500 several years ago and love it. (especially the 72" bed). It has done everything I need. If I was buying another one, I would spring for the spiral head cutter though.

Re: grizzly 8 inch joiner

#6

Re: Happy man here

Brian in Brighton

>I got the G0490 and bought the Byrd insert Shelix head.

I like it a lot, but do not have much time on it yet.

Brian in Brighton

Re: grizzly 8 inch joiner

#7

Size matters

JohnM in Mid Mich

>Get the biggest d*#%.ed jointer you can afford. Get the most powerful d*#%.ed motor you can get. I have had a 12" jointer for the last couple of years and it is hard to imagine how I ever finished a project in the past without it!

J.

Re: grizzly 8 inch joiner

#8

Re: grizzly 8 inch joiner

Mike Schwing from Maryland

>I have recently purchased the G0490/parallelogram jointer and am thrilled with it! It was a good jointer with the standard/straight knives, but I installed the Byrd Shelix cutterhead and it is now a dream machine. It now machines the gnarliest and most figured of woods to a silky smooth finish with zero tearout. Also, the beds were perfectly aligned from the factory. I'd buy it again. The only negative, at all, is that there is a spot in the rear behind the fence that shavings blow through, but all of the other waste goes right into the dust port.

Re: grizzly 8 inch joiner

#9

Re: grizzly 8 inch joiner

WRF

>thnx all for responses, sound like very positive recomendations

Re: grizzly 8 inch joiner

#10

Re: grizzly 8 inch joiner

Craig Daymon

>Sorry for busting in, but I was just looking at the G0490 with the spiral cutterhead. I imagine it's not quite the Byrd head, but probably produces a good cut.

Anyway Mike, my big concern is whether I can get it down the basement. I have one of those stupid 180 degree corners going into the basement that the builders like so much now and I was told the Powermatic parallelogram 8" jointer wouldn't make the corner. Do you think the Grizzly could? (The PM didn't have the option for the spiral head either.)

Thanks,

Craig