Finishing Troubles
Mike B.
>I have built an entertainment center out of red oak plywood and trimmed it with red oak hardwood(face frame, doors,etc.) When it came time to finish it, I started with a wood conditioner since I figure that the plywood would end up being blotchy if I didn't. It was about 72 hours before I could get back around to staining it. Therefore, the conditioner had 72 hours(more than plenty) to dry. I stained it, then waited another 24 hours to add the poly, which I thinned and sprayed on. The trouble I have now, after about 132 hours of dry time, the poly still has not dried on the plywood, it's still tacky. However, the poly on the hardwood was dry in about 36 hours. I cannot for the life of me understand what the deal is. Any suggestions?



