Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

WC Weekend Accomplishments - Thanksgiving Edition

Posts

WC Weekend Accomplishments - Thanksgiving Edition

#1

WC Weekend Accomplishments - Thanksgiving Edition

Dennis E Peacock

>Good Morning

26 Nov 2007

Happy Thanksgiving to each of you and I sure hope this finds each of you doing well as well as your families.

No woodworking for me as we've been in Alabama territory visiting my family and had a nice visit with my folks. Since both sets of grandparents are no longer with us, we try to make the best of the yearly family visits. Getting old isn't any fun but learning how to get old "gracefully" is yet another one of lifes long lessons to be learned.

Any way, back to the normal grind this week and I've got to get started on two more projects - a Black Walnut kitchen table and the LOML Jr wants a Hope Chest to store her "stuff" in for her own home one day. I figure since she's 16 years old, she should know when she needs a hope chest and now is as good of a time as any. We will build it together and I'm sure I'll cherrish the time we have together on her own little project.

I hope all of you had a nice Thanksgiving Holiday and shared with with family and friends. There's nothing more important that "people". I believe that now more than ever.

So what did YOU do this holiday weekend?

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments - Thanksgiving Edition

#2

Moved a piano, remained banned

Rod Peterson -*- Ormond Beach, FL

>I said last week that I was going to be hors de combat this week due to visiting Chicagoland, but here I am at my son's computer keeping up with WC. So here's what's been accomplished since the last report, most of it over the weekend (all four days of it).

  • Covered 1100 miles in two days, including 750 of it on the busiest travel day of the year. Atlanta was a breeze—Tennessee, both Chattanooga and Nashville, and all in between, was a nightmare. It was lonely on the highway Thanksgiving day.
  • Delivered an expandable dining room table donated by my mother to our son, but didn't get it assembled in time for dinner, which in any event, was served only a couple of hours after our arrival. It's been great since.
  • The next day picked up a rental truck and drove down to our old home town and retrieved our son's piano which had been kept at a friend's home during his vagabond years. Those things are heavy! Son's been like a kid at Christmas.
  • Yesterday, I removed approximately 25' of corrugated dryer vent along with five! 90° elbows and replaced it with 4" stove pipe and only four 90° (but larger radii) elbows. Dryer works much better.
  • Today I'll install a laundry sink for them that I picked up over the weekend.
  • I apparently remain banned from another site.
It's nice to be back in an area where both Farm & Fleet and Menards are available as alternatives to HD and Lowes. It'll be even nicer to get back home to temps in the 70s. But that's next week's report.

Rod

Re: WC Weekend Accomplishments - Thanksgiving Edition

#3

Re: WC Weekend Accomplishments - Thanksgiving Edit

Mike Fitterling

>Almost finished a pair of matching built-in bookcases for my brother and sister-in-laws' house. A flaw in the plywood where two veneers were overlapped that was not noticeable before assembly stuck out like a sore thumb after finishing. I am going to have to sand/scrape/ plane all that area flat and apply a veneer. At least it looks like the veneer will be free or at least at cost because the ply sheet was defective. One feature that was fun to make on this project was the basemoding, cut with an old molding plane I have on hand, which just happened to match the basemolding in the house it will join.

Of course, I worked in not one but two Thanksgiving dinners. My parents and in-laws live a couple blocks apart, so lunch at one and dinner at the other.

Cheers,

Mike

Re: WC Weekend Accomplishments - Thanksgiving Edition

#4

Re: WC Weekend Accomplishments - Thanksgiving Edit *LINK*

Patrick Jaromin

>My kids are quite a bit younger (22mos. & 10mos.) and require near constant attention...and my son's blotchy rash kept us away from the traditional extended-family Thanksgiving day table.

However, I did manage to log some time in the shop over the extended weekend. Since my new shop is still a work in progress, I spent a day and a half installing the cabinetry and building beefy 2-1/4" counter-tops along the 22' length of the shop for my miter and RAS stations. I'm quite pleased with the tops made of laminated 3/4" OSB and topped with a replaceable tempered masonite insert. Very solid.

Hopefully I'll be out of "carpentry" mode and back to "woodworking" within a few months.


http://tenonandspline.com/blog/albums/workshop_add

Re: WC Weekend Accomplishments - Thanksgiving Edition

#5

Re: WC Weekend Accomplishments - Thanksgiving Edit

Gary Camp, Bend, Oregon

>Well I worked Thursday, Friday and most of Saturday. We started getting ready to move on Saturday afternoon. We got access to our interim housing yesterday, so that is progessing. They will start to pick-up the house next Monday. Woodworking related, I can tell you that packing a shop and house when the temps are right around freezing is a darn good way to reduce the "scrap" wood pile. Alot of the smaller stuff that "I will find a use for" found its way into the shop stove. I think we have quite and adventure coming up. Soon though I will have a real show of my very own.

glc

Re: WC Weekend Accomplishments - Thanksgiving Edition

#6

Bart Goldberg

Re: WC Weekend Accomplishments - Thanksgiving Edit

Bart Goldberg

>Spent the long weekend doing the winter changeover - running the small engines dry (weed wacker, mower, etc), and other various chores in prep for winter.

The highlight of my weekend was installing an automatic ice maker into my 15 year old Fridge.

I just turned 50 and this is the first time I've ever had an automatic ice maker - I'm in heaven!

Its amazing what small things can give us joy!

Bart

Re: WC Weekend Accomplishments - Thanksgiving Edition

#7

Jason Roehl in Lafayette, IN

Re: Moved a piano, remained banned

Jason Roehl in Lafayette, IN

>If you haven't left Chicagoland yet, wave on your way by. As you go through the Lafayette area south on I-65, about 1/2 mile before you get to exit 172 (Hwy. 26), right after you go over the Wildcat Creek, if you look to the east, you will see a white brick subdivision sign with red letters spelling out "Foxwoods". I live back in there (we moved out of Mayberry..er..Mulberry this past summer).

Another POI in northern Indiana on I-65 might be the log home just south of Hwy 231 (exit 193), again to the east. I worked on it, (it's the model for the local Jim Barna distributor) we did the interior and exterior sealing, as well as the pine floors inside.

As for my weekend accomplishments, I ate lots of food down in Alabama also. We did our typical Wed-Sat trip to my sister's in the Huntsville area, with a trip to the U.S. Space and Rocket Center on Friday, capped off with a lunch of gypsy schnitzel and beer at the Old Heidelberg Restaurant.

Jason

Re: WC Weekend Accomplishments - Thanksgiving Edition

#8

Re: WC Weekend Accomplishments - Thanksgiving Edit

Jay St. Peter - Southern, MD

>After 3 days of non-stop eating at my parents house, I managed some shop time on Sunday. I've got the garden bench frame dry fit. Another couple hours of joinery and I'm on to shaping.

Re: WC Weekend Accomplishments - Thanksgiving Edition

#9

Fishing, swimming, snorkling, playing, eating.....

Mark Goodall - ATL - tooljunkie

>.... and generally a great time in Clearwater Beach.

It's the one time in the year I have my wife and kids all to myself!

Happy Woodworking!

Re: WC Weekend Accomplishments - Thanksgiving Edition

#10

Re: WC Weekend Accomplishments - Thanksgiving Edit

Rob Stokes in North Vancouver

>We made a beam (4"x8"x21' long)out of what was a perfectly good hemlock tree. Unfortunately for the folks that own it (not me!) it decided to come down in a recent wind and even more unfortunately there was a shed in the way (you can see it to the right, under the white tarp).

So I think it only fitting that the offending tree be used to make the parts that will soon make this shed whole again!

Rob


img

Re: WC Weekend Accomplishments - Thanksgiving Edition

#11

JL

Re: Out of town relatives...

JL

>Went to Biltmore (long drive in the RAIN!). Managed to do a little woodworking though. Cut some tenons and wedges for the tenons.

Re: WC Weekend Accomplishments - Thanksgiving Edition

#12

Re: WC Weekend Accomplishments - Thanksgiving Edit

David Hay @ Denver

>Had a good Thanksgiving week. Spent most of my free time finishing up a flooring project we started a couple of years ago. Ripped up the existing entryway flooring and put down the remaining laminate. Finished most of the trim work as well.

I did get a little time in the workshop. Got some help putting my new bandsaw up on it's stand and got the rest of it assembled. Still haven't fired it up yet...need to adjust everything first.

Have a great week!

David

Re: WC Weekend Accomplishments - Thanksgiving Edition

#13

Re: WC Weekend Accomplishments - Thanksgiving Edit

Don in Northern Arizona

>One of our Ponderosa pine trees fell down in a wind storm Friday night and landed on a neighbor's BIL's classic VW Camper. I discovered today that my homeowner's insurance will only cover 1K of the damage. I am currently praying that the BIL has comprehensive insurance on the VW. I will find out when he gets home from work today. I anticipate that our lot will have many fewer trees in the near future.

Don

Re: WC Weekend Accomplishments - Thanksgiving Edition

#14

Re: WC Weekend Accomplishments - Thanksgiving Edit

George@Colonel's Workshop-Havertown PA

>Good Evening Dennis, and a Happy Monday to you,

I got to see all my kids and all my grandkids at various gatherings. My #1 son hosted the whole family for Thanksgiving at his place which is roughly the size of Iowa. Of course, it is more like very close quarters in my little matchbox. Nevertheless, we did manage having my #2 daughter's family of 5 visit with #4 son Gabe and #7 son Jim. I needed wide angle lenses in my spectical frames to take them all in. We consumed massive amounts of Turkey and enough beer to float the USS New Jersey. I decided to fix a chair which #5 son Steve sat on and reduced to tooth picks. Its a beautiful quarter sawn white oak T back Dining Room chair. I made both legs and morticed slots for the seat rails and lower back rails, and thicknessed the pieces. The dry fit is fine everywhere. Tomorrow I will locate and drill holes for the stretchers and dowels, and perhaps get a good dry fit on the entire assembly. The chair has been awaiting shop for over a year while I decided if it was really worth the effort. But it got my mortiser to center stage and I thoroughly enjoyed using its unique features. Between family and the shop, it was an unbeatable weekend. Have a great week.

George

Re: WC Weekend Accomplishments - Thanksgiving Edition

#15

Re: WC Weekend Accomplishments - Question/Observat

Rob Stokes in North Vancouver

>Now - please don't get me wrong, I'm not trolling here, but I'm really curious about something. There's been over 125 views of the post I made about cutting a beam out of a tree and not one comment. But the threads that head off topic about French Canadian food and Uncle Joe's health problems seem to initiate conversation.

Maybe it's just me - but I think that a couple of backyard hacks making a square beam out of a round tree using tools scrounged off Craigslist and Ebay is FAR cooler than Uncle Joe's bunion and why Electrical power is sold by a company with "Hydro" in it's name. Or maybe I'm wrong??

Rob