Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Shaker writing desk

Posts

Shaker writing desk

#1

Shaker writing desk

Mike Schwing from Maryland

>Been working on this for a couple of weeks. Finish hasn't hardened yet, haven't rubbed it out, so its still a little glossy for my taste. This is a Shaker writing desk, made from curly cherry and very curly maple.

The base was stained with General Finishes oil based stain in "warm cherry" and the top was dyed with Transtint "Golden Brown". Thereafter it received one coat of shellac then 3 coats of ArmRSeal. This was a much more involved project than I had figured on, but it sure was worth it. The trestle is very stout, and was done with 1 1/16" thick lumber for that purpose. Looks a little timid without a bottom stretcher but rest assured it is not. I think I'll be building more of these as this was sold before it was finished. Comments welcome!


img

Re: Shaker writing desk

#2

Re: Shaker writing desk-Google Ads!!

Ron Hildreth

>Someone wanta fix the google ads on the right of Mikes post? Can't read it!

Ron in Iowa

Re: Shaker writing desk

#3

Try these links instead?

Mike Schwing from Maryland

>What do you see? It looks normal to me on this PC.

Here are the pics I posted...

http://farm3.static.flickr.com/2136/2057674261_b71f73c6e1_o.jpg

http://farm3.static.flickr.com/2416/2057674267_4f61861f2b_o.jpg

http://farm3.static.flickr.com/2239/2057674277_2bead0511a_o.jpg

Re: Shaker writing desk

#5

Back To The Writing Desk!

George@Colonel's Workshop-Havertown PA

>Wow Mike,

That is beautiful. That design and finishing schedule is what I'd hope for in the finished project. Are you sure it needs a rub out? It looks perfectly great from here.

George

Re: Shaker writing desk

#6

Re: Shaker writing desk

Joe in a Cleveland suburb

>Mike.

This is very nice. How did you smooth that maple? Plane or sand paper?

Really very nice.

Also, the spoons and so on you do

are great. Have you considered doing an article on how you make those?

Joe

Re: Shaker writing desk

#7

Re: Shaker writing desk

Mike Schwing from Maryland

>Thanks Joe. This was a hand tool project. Aside from thicknessing and ripping the table top, everything was done with hand tools on this one, including finishing. The top was done with a Knight smoothing plane, but with wood this curly I had to plane perpendicular to the grain to avoid tearout. The end grain was actually easier to deal with than the top! After that it was scraped, and then since it was to be dyed, sanded to 220.

As to the spoons, I actually wrote a "how to" regarding my spoons that was published in Woodcraft Magazine a few years ago.

Re: Shaker writing desk

#8

Wow, awsome looking desk Mike!

Pete Stahl

>