Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Mostly OT: Chimney cleaning

Posts

Mostly OT: Chimney cleaning

#1

Mostly OT: Chimney cleaning

Ken Platt (Granby, CT)

>Folks -

I've generally opted to have a guy come out and clean my chimney for me, since the rather heavy fireplace insert (Vermont Casting Winterwarm) needs to be pulled out to get at the bottom of the flue. However, this year for whatever reason my usual chimney guy is blowing me off, so (being a born-to-DIY-type) I'm wondering if I can do this myself, hopefully without pulling the insert.

Has anyone worked out a decent way to do the cleaning from the top? I'm picturing some sort of little tray for underneath the brush which catches most of the scrapings. Then, maybe I could attach some sort of smallish diamenter, very flexible tube to the shop vac and snake it up the insert's damper opening to get the stuff that falls into the short tube that runs from the insert's top up into the bottom of the flue.

I can also run the shop vac hose down from the top, but I'd have to kludge together a longer length (maybe 12 feet) and I'm not sure the shop vac would be effective with that length of hose. Anyone had any success with this?

Anyone out there worked this problem out? BTW, the flue is only in need of a light scraping; there's just a thin layer of peeling stuff, looks like peeling paint. Thanks -

Ken

Re: Mostly OT: Chimney cleaning

#2

Re: Mostly OT: Chimney cleaning

Kneale Brownson awaiting snow in N. MI

>I don't think you want that loose stuff just sitting on top of your stove. I'd not brush it out without being able to get to the loose stuff. I used to use one of those appliance dollies to make insert movement easier.

Re: Mostly OT: Chimney cleaning

#3

Except for the long run . . .

Steve Mackay

>of vac hose, you just described how I do it twice a year. Dont know if you mentioned it but the other thing I do is get a piece of cardbord bigger than the room opening and cut a hole just big enough for the shop-vac hose and tape the hose and around the perimeter of the opening. I know in my brain that its not enough negative preasure to suck up everything thats falling but I can fool myself enough that I'm not cleaning soot of the bookcase.

Re: Mostly OT: Chimney cleaning

#4

Re: Mostly OT: Chimney cleaning

Virgil Johnson

>When I move my Buck insert I raise up the insert slightly with a pry bar then put a 12" x 12" ceramic tile smooth side up underneath. The insert slides easily on the tile out to a point where I pivot it to the left far enough to gain access to the opening. I tape plastic over the fireplace opening then cut a slit to work through.

Re: Mostly OT: Chimney cleaning

#5

Re: Except for the long run . . .

Ken Platt (Granby, CT)

>Steve, are you saying that you have worked out some sort of tray to catch stuff falling from the brush? If so, could you elaborate, maybe post a pic? I don't have a brush yet, but I don't offhand from the pictures I can find online see how to attach a tray underneath.

Thanks -

Ken

Re: Mostly OT: Chimney cleaning

#6

Re: Mostly OT: Chimney cleaning

Ken Platt (Granby, CT)

>Virgil, that's a great idea. I even have a bunch of tiles sitting in a corner in the basement. The only problem is that there is very little clearance between the top of the insert and the lower edge of the front of the fireplace, so I might not be able to get the tile underneath. Still, worth a try.

I hadn't mentioned this in the original post, but part of the reason I hate pulling the insert is that the flexible steel tube doohickey that takes off from the top of the insert has to sit at a weird angle because the flue is actually off to the side of the firebox. It is very hard to get it reseated on the flange at the top of the insert, and even at that needs to have high-temp cement globbed around it to kind of seal it in place. It is a major PITA. Any cleaning method that avoids screwing around with this would be a godsend. My hands just don't flex like they used to....

The chimney guy had brought out a contraption which is actually marketed under the name of "insert puller". It is very slick in use but astonishingly pricey - the only online source I found for it listed it for $800.

Ken

Re: Mostly OT: Chimney cleaning

#7

Re: Except for the long run . . .

Steve Mackay

>No tray. The cardboard over the opening with the vac just contain the mess. When I'm done brushing I go through the whole thing with the vac. Tried to rig a tray but wound up dumping it anyway trying to get it out again.