Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

strength for frame

Posts

strength for frame

#1

strength for frame

woodenleg

>My neigbor lady ( who makes really good cookies) had a mirror fall from her wall and the frame broke. She asked me to fix it. All the miters are splined and I don't have all of the spline pieces. Some of the pieces will not come out of the miter so here is my question, Can I use some of the fiberglass tape (used on drywall joints) to rienforce the joint? I am gluing what spline material I have back into the miter and then was thinking that I could use the tape for more strength going across the back side of the miter holding it in place with small staples. The wood is fir.

Dave

Re: strength for frame

#2

Yup ! . . .

Steve Mackay

>Use it on my French Style frames. I put glue down, apply the tape, smear some more glue over, cover with a heavy ( cut open Baggie ) plastic, put on a block of styrofoam ( so it conforms to the surface ) then spring clamp. Afterwards I cover the back with that vintage looking brown paper to hide everything.

Re: strength for frame

#3

Re: Yup ! . . .

woodenleg

>Thank You!!

Re: strength for frame

#4

Pleasure. Good luck. Want pic !

Steve Mackay

>