Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Sources for used cantilever storage racks

Posts

Sources for used cantilever storage racks

#1

Sources for used cantilever storage racks

David W

>I recently came into possession of a lot of wood - mostly cherry, maple, walnut and some real Honduras mahogany. I know this sounds like a gloat and I suppose it is, but I now have a big storage problem. I can't estimate the amount of board feet, but the wood came on a 50' trailer and was stacked solid - no stickers - about 6' high by 8' wide. It took 5 of us nearly 4 hours to unload. I now have stacks of wood all over our barn and I will probably be moving it for many months before I can start using it. I want to buy some used industrial storage racking - the cantilever kind so it is open from the front. I can accomodate 12' uprights easily and probably want two racks with 3-4 uprights and 4' to 5' arms (maybe 3-4 arms on each upright). I found some possiblities on the web, but wanted to know if anyone had any good experinces with any specific suppliers. Someone located in the Midwest might be best from a shipping standpoint. Thanks.

Re: Sources for used cantilever storage racks

#2

Re: Sources for used cantilever storage racks

Kneale Brownson awaiting snow in N. MI

>I'd look for industrial plant auctions. I recall going to one where they made plastic parts and had lots of standard racks, but they also had a huge wall of cantilever racks. They went for next to nothing, probably someone buying for their scrap value. The standard racks drew a much better price.

Re: Sources for used cantilever storage racks

#3

Chico's just done this.

Garrett in Victoria

>Chico Sakman is a wood addict/hoarder, and recently showed me his new storage solution that could meet your needs exactly.

Hopefully, your barn has studs (not the animal kind). Go to a metals supplier and buy as many 2' lengths of 3x3 steel angle as you will need. Drill two 3/8" bolt holes in one end and bolt them into the studs as shelf brackets. Then partner the studs with additional 2x4's that are tightly fitted between the brackets to prevent any sag/twist.

The result is incredibly strong lumber storage open at the front for very little cost and nmot a lot of work.

Cheers, Garrett