Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

soft maple

Posts

soft maple

#1

soft maple

Dan Collins

>Friends: I do a lot of work with hard maple, walnut and cherry. I recently found some soft maple that looked nice. I am thinking of building a bookcase with the soft maple. Before I buy all the wood, I thought I would ask if anyone has had any experience, pro or con, with soft maple. It looks a bit more bland and it is lighter in weight than the hard maple. Does it plane OK? Does it make crisp joints? Is it sturdy enough to support books in a bookshelf? I don't stain my wood, so that is not an issue. I normally use a wipe-on poly for finish. Thanks for your thoughts. Dan

Re: soft maple

#2

JL

Re: soft maple

JL

>Does it plane OK?

Soft maple planes great, scrapes great and turns great. It is easier to "machine" than hard maple.

Does it make crisp joints?

In my experience it does.

Is it sturdy enough to support books in a bookshelf?

Depends on the shelf dimensions and the weight of the books.

Pros - you can get some really interesting grain patterns in some pieces (fiddleback, curly, etc.). It can look really nice with a bit of stain or dye and an oil finish.

Cons - deforms and dents rather easily - it is soft after all.

Re: soft maple

#3

jointing and planing soft maple

Yonak

>Dan, I don't know about hard maple, but I have a devil of a time jointing and planing soft maple. No matter which direction I go I'm sure it will chip out someplace along the way. The only solution I've found (it's tedious and aggravating and is only marginally successful) is to go very slow and only take off minuscule amounts of material.

Re: soft maple

#4

Re: soft maple

Ken Oakley-Sunny St. Cloud, Fla.

>I have a stack of it given to me by a friend. I love working with it and I sometimes stain it and finish with Deft lacquer. No problems machining and items I made 7-8 years ago still look new. It finishes great. Mine was grown locally here in Fla. so may be a little differant then yours.

Re: soft maple

#5

Re: soft maple

Ron Hildreth

>Dan,

In a lot of ways, it works a lot like pine, but stains better - doesn't seem to splotch. At least what I've worked with was that way, but it's been a few years since I've worked with it.

Ron in Iowa

Re: soft maple

#6

Soft maple is good to work with

Lee Schierer - McKean, PA

>I've made a number of furniture and cabinet type items from soft maple. It is a good solid wood. Stronger than Poplar. When jointed, the edges can be sharp enough to cut your hands. Small dents and dings easily come out with a drop or two of water placed directly on the ding. It takes finish well except for staining which can sometimes apear blotchy. Here's a bathroom vanity and mirror made from soft maple. The finish is Varathane Diamond semi gloss floor finish.

Lee


img

Re: soft maple

#7

Re: soft maple

Hank Knight

>Dan,

I'm currently building Garrett Hack's hunt board that apeared in Fine Woodworking a while back from soft maple. It's the first time I've used it and I've been pleasantly surprised how easily it works. I get crisp joints with both machines and hand tools, and it planes nicely. I roughed out the tapered legs on my bandsaw and planed them to final shape. They turned out great and the planing was a pleasure. All of my surfaces are hand planed and they look really nice with no tear-out. Here's a picture of the legs with the sides and back in the background:

Photo Sharing and Video Hosting at Photobucket

Here's a better focused close-up of the sides after planing so you can see how nice they turned out:

Photo Sharing and Video Hosting at Photobucket

And a picture of the partial assembly:

Photo Sharing and Video Hosting at Photobucket

It is noticeably softer than hard maple but it is much easier to work. I haven't gotten to the finishing stage yet, so I don't know what to expect. I also don't know what to tell you about the strength for your book case, but my guess is that it would be fine for a moderate sized piece.

Hank

Re: soft maple

#8

Re: soft maple

Ed Mulligan, Cape Cod

>I've milled and used many hundreds of board feet of soft maple with no unusual problems. When finished clear it can have a slight grayish cast. Hard maple has a slightly yellow tint which increases with time.

Ed

Re: soft maple

#9

Re: soft maple

waroland

>I used soft maple for my kitchen. The white cabinet top is Hard Maple. The soft maple will tear out sometimes but going slow with sharp cutters works good. I later added top cabinets and crown molding.


img