Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

split cedar look

Posts

split cedar look

#1

split cedar look

John Foster

>We are having a bedroom set being built for us by a local furniture maker. We were inspired by pictures of a set we saw on the internet. As we first saw it the bed had panels in the headboard and footboard that resembled split cedar, much like a cedar shake. The man building it for us is not ready to start yet, and we are still deciding what we want for the inset flat panels. Does anyone know how to get the rough split shake look on one side of panels made up of glued cedar dimensional lumber? I have tried samples with the propane torch/wire brush method, but this did not produce the desired texture. Tomorrow I am taking some pieces to a neigbour with a sandblaster. Does anyone have any other suggestions? Thanks John.

Re: split cedar look

#2

Re: split cedar look

Clint Searl, at the base of Haycock Mtn

>Sand blasting can produce very attractive relief effects. If you go that way, consider plain sawn cypress instead of cedar. The picture is of a small piece of cypress that I sand blasted. The difference between early and late wood is quite pronounced.

Clint


img

Re: split cedar look

#3

Re: split cedar look

Clint Searl, at the base of Haycock Mtn

>Sand blasted cypress cast in bronze.

Clint


img

Re: split cedar look

#4

Test

John Veerkamp

>