Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Results of Modification of Dust Collection on

Posts

Results of Modification of Dust Collection on

#1

Results of Modification of Dust Collection on

Ray Binnicker

>Delta Bandsaw.

Thanks to all the folks last night who told me how to fix the dust collection problem on my old Delta Bandsaw. I went out this morning and bought a flange; I already had a bi-metal hole saw. It took be all of 30 mins to cut the hole, drill the holes for the flange and tape up the old dust port (for all the good that thing was I could have left it open). I test fired it by cutting up 3 pieces of 3 inch Angel Heart into bowl blanks. The only dust was a little bit laying on top of the table. Man, I should have done this 10 years ago. I tried to kick my own butt but fell down and scraped a knee!

I am trying to attach some pictures.

Thanks again for all the advice

Ray Binnicker


img

Re: Results of Modification of Dust Collection on

#2

Pic # 2 Dust Collection 

Ray Binnicker

>


img

Re: Results of Modification of Dust Collection on

#3

Pic # 3 

Ray Binnicker

>


img

Re: Results of Modification of Dust Collection on

#4

Re: Results of Modification of Dust Collection on

George@Colonel's Workshop-Havertown PA

>Good Afternoon Ray,

You sure didn't let any dust settle before making that modification, which is very similar to my own saw's new port. You have just made your tool even better. Enjoy it.

George

Re: Results of Modification of Dust Collection on

#5

Nice job. I wonder if

Garrett in Victoria

>you'd get rid of most of that dust on the table by drilling some holes in the throat plate. I don't seem to get nearly so much dust on the table. but since I made a wooden plate for my saw, I'll give it a try and report back asap.

Cheers, Garrett

Re: Results of Modification of Dust Collection on

#6

Re: Nice job. I wonder if

Ray Binnicker

>That's a good idea Garrett. That is one of those plastic "zero clearance" ones on there. I will make a wooden one and put some holes in it. But, even with that little bit on the table, I can live with this now.

Ray

Re: Results of Modification of Dust Collection on

#7

Love the tennis balls

David Charters (Durham, NC)

>Great idea with the tennis balls, I clipped my bandsaw fence with my arm a few years ago and still have a nasty scar. Wish I had tennis balls on there. I have used an old slipper since but that didn't work so well.

dc

Re: Results of Modification of Dust Collection on

#8

Re: Love the tennis balls

Ray Binnicker

>Hey David,

I can't tell you how many times I bent over to retrieve a piece of wood and stood up and caught those extensions. After I got tired of scrapes/cuts/head aches I was following a truck one day and he had a tennis ball over his trailer hitch ball. The light went on.....

Re: Results of Modification of Dust Collection on

#9

Re: Love the tennis balls

George@Colonel's Workshop-Havertown PA

>Hello David,

I wondered what they were. I couldn;t make them out with my eaglette eyes. I had similar motivation and took a file and softened the extruded ends of the rails on my band and table saws. It was more fun that way, not being bloody. But I couldn't brag that I had a ball!

George