Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Jealous as hell of Dream Shops in latest FWW

Posts

Jealous as hell of Dream Shops in latest FWW

#1

Jealous as hell of Dream Shops in latest FWW

Chris Knob

>One guy has 2500 sq ft in a one man shop???? Can I rent half?

My garage shop got relegated to a basement with 6'3" height clearance (where there are no pipes) a oil tank, a heater, washer dryer and cat litter pans. No wonder my output fell off 90%

One of the profiled shops is Matt Teague's new 700+ sq ft shop he built for slightly less than $40,000. I remember an article in the same publication years ago profiling his one car garage shop that highlighted novel layouts of machinery and mobility. Glad to see he's moving up in the world. His dedicated new shop is just beautiful.

Re: Jealous as hell of Dream Shops in latest FWW

#2

My shop is TWICE as big?

Mark Goodall - ATL - tooljunkie

>250 sq.ft???.... ha... mine is nearly TWICE that size at 550 sq.ft.

Sure, I have to keep a 80 gallon water heater, two laundry tubs, a van and golf cart inside.... and sure I have 1"-2" between each machine when shoved up next to the wall...... and sure, I have to spend 20 minutes moving machines around to get to do anything.... but it's a whole 550 sq.ft workshop, not like that 250 sq.ft shop you mentioned.........

What? Pardon me? You said what?

2500 sq.ft.?!?!?!

(thump) ouch, I just fell out of my chair.

Happy Woodworking!

Re: Jealous as hell of Dream Shops in latest FWW

#3

It's not the size of..... oh nevermind.

Steve in Fresno Go Dogs!!

>

Re: Jealous as hell of Dream Shops in latest FWW

#4

My shop REALLY is TWICE as big; Gloat

Keith Newton

>My one-man shop is 50 x 100' with 12.5' ceiling height, the another 10.000 sq. ft of fenced parking lot for the woodmizer, and storage area. It was a grocery store when it was built in 1926.

When it comes time to clean-up, I envy you guys in smaller shops. Also, sorta like the movie, "if you build it, they will come." If you have the space, the volume of tools and supplies will expand to fill any given volume space available. It is still hard to keep the clutter from interfering with the flow.

But I am not planning to downsize anytime soon.

Re: Jealous as hell of Dream Shops in latest FWW

#5

Re: Jealous as hell of Dream Shops in latest FWW

john lucas

>I was madly in love with the round shop that had the rotary crane inside. I am definitely going to have one of those one of these days.

Re: Jealous as hell of Dream Shops in latest FWW

#6

Re: My shop is TWICE as big?

Ron Hildreth

>I guess that's one of the reasons I'm trying to be so very patient waiting to buy the shop I've been dealing on just two blocks from my house. 2250 sq ft with 10-12 ft ceilings! It's hard to just walk away from something like that!

Ron in Iowa

Re: Jealous as hell of Dream Shops in latest FWW

#7

Re: My shop REALLY is TWICE as big; Gloat

Bill Schreiber, Litchfield, NH

>Keith,

Thanks so much for rubbing it in although I am happy I don't have to heat that huge space. Mine is about 400 ft2 in my basement. If I had exterior heated wood storage, I would be very happy with my shop unless I decided to build kitchen cabinets or something like that.

Regards,

Bill

Re: Jealous as hell of Dream Shops in latest FWW

#8

Your problem begs for a new term…

Rod Peterson -- Ormond Beach

>> If you have the space, the volume of tools and supplies will expand to fill any given volume space available.

I guess you could call that the Joseph Corollary to Parkinson's Law. How's that, you say? Okay, try to follow this:

In 1958 Cyril Northcote Parkinson observed that “work expands so as to fill the time available for its completion.”

Years ago I postulated the Winchester Corollary—that data (including software) expands to fit the size of hard drive available (early IBM hard drives were called “Winchesters” because of their construction—two spindles of 30 Mb capacity each—hence 30-30—Winchester was a logical appelation to that characterization—you can look it up). It didn't seem to catch on.

Joseph (a famous carpenter) is my suggestion for the namesake to a corollary which would explain that the tool complement (and associated raw materials) will expand to fit the shop allocated for it—the Joseph Corollary to Parkinson's Law.

You read it here first.

Rod

Re: Jealous as hell of Dream Shops in latest FWW

#9

Mine, not quite as big

Craig in SIlverdale

>My shop is a corner of the basement and weighs in at 17' X 16'. If I need to put something big together I have to assemble it in the rec room. Needless to say, the SWMBO isn't always happy.

Re: Jealous as hell of Dream Shops in latest FWW

#10

Re: Yesterday we filled out papers..

Gary Camp Bend, Oregon

>We got pre-approval on a loan last Friday, and filled out the paperwork for final loan yesterday. We are trying to purchase about 5 acres with a sorta pole barn on it now. We will move the house we are living in now to the site in about 3-1/2 weeks (I hope). We are also moving the Garage / Shop. 24 X 48, it currently has an eight foot wide metal "lean-to" down one side that I will dismantle and re-instal. I hope I can raise the roof a foot it is just a shade on 8Ft now.

Wish me luck

glc

Re: Jealous as hell of Dream Shops in latest FWW

#11

Re: Yesterday we filled out papers..

Larry Clinton

>Gary, if you are moving your shop, just have two of three courses of block laid on the new foundation. Three block = 24" of height, if you want more height just lay more block. (You do have to install the anchors in the block). When I built my shop, I used standard 2X6 stud walls & drywall, but have the walls anchored on block laid 3 courses high. This gives me 10' ceiling height. I did insulate the blocks with the pourable Styrofoam ball insulation then poured mortar into the "anchor" blocks & installed the anchors. I then coated the outside with waterproof white paint. I painted the inside with the same paint I used on the walls. I really like the size of my shop (30 X 30') with a wood storage area upstairs (10' X 30' with 8' knee-wall ceiling). It really is large enough for what my son and I do, and as I super-insulated it, doesn't cost much to heat and air condition.

Re: Jealous as hell of Dream Shops in latest FWW

#12

Heh, I worked on those.

Eddie Pacheco; San Jose, Ca.

>Those were some beasts for sure. The 303-30 name didn't stick 'cause some rifle company didn't like like some other company using that moniker. A few more MB were dug up and it was called the 33-30.

Rod,that plant site, a picturesque 350+ acre campus, my sub home for 30 yrs. is now pretty much leveled save for a few buildings. It will soon become mixed use high density housing and retail.

Have a nice Thanksgiving.

Re: Jealous as hell of Dream Shops in latest FWW

#13

Re: Yesterday we filled out papers..

Gary Camp, Bend, Oregon

>It looks like a short stemwall won't really be much extra, so I'll have at least a 9ft ceiling. I'm getting excited / nervous.

glc

Re: Jealous as hell of Dream Shops in latest FWW

#14

Re: Yesterday we filled out papers..

Carol - now in NC Nebraska

>Way to go, Gary.

Excited is good. Don't be nervous.

You are gonna so love your new place.