Continuous arm settee
JL
>Soft maple turnings, white oak spindles and hoop, cypress seat.
Turnings and the bottoms of the spindles were set with yellow glue. Tops of the spindles and the hoop were set with liquid hide glue.
Knowledge You Can Build On — Est. 1998
Continuous arm settee
JL
>Soft maple turnings, white oak spindles and hoop, cypress seat.
Turnings and the bottoms of the spindles were set with yellow glue. Tops of the spindles and the hoop were set with liquid hide glue.
Re: Side view
JL
>I've got to finish the sanding and then stain it. Don't ask how many hours went into it.
Re: Side view
Martin from Granbury
>Very nicely done!
Please post explanation and pics of your staining/finishing methods.
Are you going to use stain or aniline dye?
Re: Continuous arm settee
Kneale Brownson awaiting snow in N. MI
>Very pretty. Did you use the hide glue to give more time for getting all the spindals into all the holes?
Lovely
Jennifer@Indy.USA
>Very nice JL. Looking forward to seeing it totally finished.
Jen
Very, very nice!
Bruce, a MN galoot
>Coupla questons:
1. do you have any comments on the bending process?
2. are the spindles turned, or did you spokeshave them?
3. Did you take any classes to learn Windsors?
Really nice job.
Bruce
Re: Yes..
JL
>the longer working time was needed. Not to mention the fact that if something broke (like the hoop) it could be fixed.
Re: Answers
JL
>1. do you have any comments on the bending process?
Steam bent - about 1 hour. Then wrapped around the form, wedged into the form and dried for 4 days at about 130 degrees F.
2. are the spindles turned, or did you spokeshave them?
All rived, drawknifed and spokeshaved.
3. Did you take any classes to learn Windsors?
Several - most at J. C. Campbell Folk School.
Re: Side view
JL
>I am waffling between stain and Transtint dye for right now. I have a couple quarts of Varathane stain (courtesy of my sister). I really like the color of one of them and I think I'll try that.
I'll be finishing with a mixture of Tung Oil, gloss polyurethane and mineral spirits (1:1:1).
Fantastic!
Mike Schwing from Maryland
>
WOW!
Bill Tindall, E.TN
>I am in awe at people that can make chairs. I can't begin to imagine how one gets that bent piece to come out right.
Beautiful!
Joanne Adler in Pt. Pleasant, PA
>Delicate and graceful, yet very sturdy looking. Elegant!
Re: Continuous arm settee
JohnKJordan in East TN
>Excellent. Wow, a guy with time, energy, AND talent!
Hey, what's that thing in the lower right corner of the side view? I think I have a whole pile of those if you need some more.
JKJ
Re: Failed cradle spindle...
JL
>but it turned out to be just the right diameter for sharpening my chair devil. I wrap it with pieces of sandpaper and use it to sharpen my large diameter chair devil.
Very, very nice!
Jim Dillon
>JL,
You are really making progress in your woodworking skills; I am envious! I always look forward to see what you are doing next. Thanks for posting.
Jim
Re: Continuous arm settee
Philip Duffy
>Great looking setee! Did you peg the top of any of the spindles? What kind of steam box did you have for the bending? Green wood? Philip
A Masterpiece! Awesome!
Don Pierson
>
Re: Continuous arm settee
JL
>Tops of spindles are wedged with walnut wedges as are the legs. We did a co-operative steam bending (as it takes three people to bend and wedge the hoops in the form) - we used a turkey fryer set-up. We put a wooden box (96" x 8.5" x 8.5") with a hole cut out in the center over the turkey fryer. The sides of the pot were covered over with some cut-outs. We had two meat thermometers on either end to monitor the temperature. I came with three hoops and the others had either one or two hoops.
You are a fine craftsman indeed.
John Pappas
>
Re: Continuous arm settee
Bill Schreiber, Litchfield, NH
>wow, my hat is off to you.
I am impressed.
Thanks so much for sharing the picsw
Regards,
Bill
Re: Side view
George@Colonel's Workshop-Havertown PA
>Good Afternoon JL,
It looks pretty comfortable, too. Its a wonderful job, and I won't ask about the man-hours it took. But I am curious. :<)
George
Beautiful work!
Gordon Sampson
>Nice workmanship and beautiful lines.
Gordon
Re: Continuous arm settee
Larry Clinton
>Great work - very graceful lines, beautiful piece. I would say without reservation your classes paid off.
Re: Side view
JL
>Figure on about 14-16 hours for the spindles and the hoop. Figure on maybe 12-14 hours for the turnings. Maybe about 12-14 hours for the seat (jointing, gluing, laying out, cutting out, drilling, carving and then sanding). Add about 10-12 hours for all the tuning and fitting. About 1 hour for the gluing. I'll spend another 5 hours on sanding and staining. Add another couple hours for putting on multiple coats of finish.