Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Something to make you cry.....

Posts

Something to make you cry.....

#1

Something to make you cry.....

Pete in Holland

>I was digging thru my archives of old books this weekend and ran into a 1944 catalog from a machine tool dealer in California. Quite a lot of woodworking equipment and tools were available......and with prices! Some of the stuff is as such:

Stanley 1/4" electric drill - - $36

Black & decker 1/4" electric drill - - $32

12" Delta wood lathe - less motor - $87

10" Delta unisaw - $137

6" Delta jointer with enclosed steel stand - w/o motor - $77

14" Delta bandsaw with steel base - w/o motor - $83

24" Delta scroll saw with open base - w/o motor - $53

6x48" Delta belt sander w/motor - $72

Carter brand routers - $67-197

Lots more machines & tools are in the catalog, as this is only an interesting sampling. Twas interesting to note most powered machinery were offered without electric motors. Twas also interesting that the early power hand tools were very expensive. It's a good thing power hand tool design has kept their costs down.

Enjoy........

Pete

Re: Something to make you cry.....

#2

OT Re: Something to make you cry.....

Larry Clinton

>Doing a cost comparison - the average wage in 1942 was $3450 - average wage 2006 was $38.651. So over 11.2 times (ignoring increased taxes etc.). Multiplying by 11 would be a somewhat realistic figure as far as todays cost.

Stanley 1/4" electric drill - - $36 X 11 = $396

Black & decker 1/4" electric drill - - $32 X 11 = $352

12" Delta wood lathe - less motor - $87 X 11 = $957

10" Delta unisaw - $137 X 11 = $1507

6" Delta jointer with enclosed steel stand - w/o motor - $77 X 11 = $847

14" Delta bandsaw with steel base - w/o motor - $83 X 11 = $913

24" Delta scroll saw with open base - w/o motor - $53 X 11 = $583

6x48" Delta belt sander w/motor - $72 X 11 = $792

Carter brand routers - $67-197 X 11 = $737-$2,167

"Lots more machines & tools are in the catalog, as this is only an interesting sampling. Twas interesting to note most powered machinery were offered without electric motors. Twas also interesting that the early power hand tools were very expensive. It's a good thing power hand tool design has kept their costs down."

I have used many of the tools from that era. The 1/4" drills were quite high speed - with a lot less power than today's - for $350 - $400!

As I recall, few people owned many (if any) power tools. Most were used in Industry or by large commercial businesses. As I remember the local carpenter / handyman that lived in our small town and worked throughout the area building on / repairing homes had 1 power tool - a worm drive circular saw - and he guarded it like it was gold. (looking at the price comparisons above, it probably was). The only table saw in the small town / area was owned by the Farm Bureau Co-op as they had a small lumberyard. I remember I received my first drill around 1950 - 53 as a Christmas present.

Re: Something to make you cry.....

#3

Looks like prices in the Harbor Freight Catalog!

Chris Knob

>

Re: Something to make you cry.....

#4

But, what were wages in 1944?

Ray Newman

>

Re: Something to make you cry.....

#5

Dale Lenz

Re: Read, Larry's post above

Dale Lenz

>Min wage in 1942 according to my quick Google says: $0.45/hr.

Re: Something to make you cry.....

#6

Re: Something to make you cry.....

Lee Schierer - McKean, PA

>If you calaculate inflation for the drill ($36), it would cost $405.50 in today's dollars. To pay that much for a drill today, it would have to be one heck of a drill.

Lee