Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

rusting power tools

Posts

rusting power tools

#1

rusting power tools

MIke G

>I have an unheated shed that I try to use as my shop. (I've got the tools, just not the time or skills, but someday...) Anyway, my drill press and jointer are about a year old and they are rusting. I have put tablesaw topcoat on and even wax but it hasn't seemed to help much. If I put oil on won't it attract sawdust? I'm open to suggestions. thanks, mike

Re: rusting power tools

#2

Re: rusting power tools

Moses Yoder in White Pigeon, MI

>Warm air can hold more moisture than cold air. Moisture will condense on surfaces as the air cools. Also as air heats up in the morning and your cast iron surfaces are still cold the moisture will condense on the table because the air immediately above the table is cooler and cannot hold as much moisture as the air above it. The best thing to do to keep your tables from getting condensed moisture on them is to build a removable cover for them. These are fairly inexpensive to build if you use 1/4" plywood. A lot of threads have been written about rusting tools; you can click on "MESSAGES ARCHIVE" to the left on your screen and surch for messages posted by Forrest. He has written quite a bit about covering tools and setting a heat source under them to prevent rusting in the worst cases.

Re: rusting power tools

#3

Use these item's (no rust at all)

del schisler

>here is the stuff you need http://www.theruststore.com/Boeshield-T-9-12-oz-Aerosol-P3C4.aspx And this http://www.theruststore.com/Rust-Removers-C1.aspx just copy and past i have used these item's and i have no rust at all del

Re: rusting power tools

#4

Boeshield T9

Nathan

>I've heard Boeshield T9 is recommended for rust prevention.

Re: rusting power tools

#5

Rust is a nusance...not a death sentence

Chris Knob

>In cetain climates at certain times of the year, you are going to have to take precautions to avoid rust but some rusting of cast iron woodworking surfaces is unavoidable...and as long as you avoid pitting, you really don't have to sweat it too much. Yes, once every few years I get obsessive about mirror polishing the surface of my table saw through 2000 grit paper and applying several microns of wax but it doesn't improve performance over a smooth, waxed, rust stained here and there table top. In an outdor shop at the mercy of the atmospheric variations in your climate, keeping your tools showroom new will be a battle. Keeping them fully functional and operating smoothly shouldn't be anything more than routine.

Re: rusting power tools

#6

Re: rusting power tools

MIke G

>thanks, I'll check it out.