My Latest Project
Bart Goldberg
>Hi all,
My latest project completed.
Its a table/bar that will be installed in my brothers new kitchen.
Its a monster - 43" high, 70" wide and 24" deep.
Its made from a unique type of rather expensive bamboo plywood called Plyboo.
Nasty stuff to work with - very splintery and very dense and heavy - but looks cool - kinda like Zebra wood.
Only a decorator could have come up with this stuff.
I had to laminate two sheets together to make the 3/4" thick sheets
into 1 1/2" thick sheets to make them thick enough for a counter top.
I also had to rip off the face veneer from some scrap and apply it to the exposed plywood edges to cover them up.
Joining the side to the top was a bit tricky - Originally, I was going to do mitered joints with splines -
However, that would have been a bit difficult to align during construction do to its size and weight- So I decide to do a lap joint instead.
I cut rabbits in the sides of the top - leaving the top surface veneer in place so that the top was an unbroken surface.
Then glued the sides to the top using epoxy - nice and strong. However, to reinforce the lap joints, I added
Walnut Miller dowels - I thought a nice color match.
To cross cut these huge sections to size accurately, I had to construct a sled for my table saw.
That alone took almost an entire day to construct - but was necessary to be able to make accurate cuts on my table saw.
Once the whole thing was constructed, I had to completed cover the piece in 2 part epoxy to
encapsulate the grain to deal with the splinters and fill in the many voids in the surface.
Sanding off the epoxy was not fun.
Then I sanded the whole table to 600 grit and applied one coat of Gel Poly.
Three or more coats of poly and it will be ready to be delivered.
Note the wheels are temporary - just to be able to move the thing around by myself while finishing.
Enjoy
Bart
P.S. Special recognition to a great friend, John Chase, who spent several days at my house helping me construct this monster.





