>I've always liked the textures and colors of old weathered wood, so I made a new bathroom vanity for our spare bathroom from some old barn wood. It's probably old growth long leaf yellow pine. The panels are old galvanized sheet metal from the roof of the barn.
I haven't installed the faucet yet, but I wanted to get a snapshot of it posted before I put it in the bathroom. There's not enough room in the bathroom to photograph it.
>The top has a couple of coats of Waterlox. It really brings out the warm honey color of the yellow pine. Some of those old boards had growth rings of 30/inch. There is no finish on the weathered wood or sheet metal.
>Very nice. Really diggin' the mixed mediums. I'm seeing a fair amount of weathered wood in the flooring biz these days. Just finished up some samples for a customer using some 12" wide white oak barn boards. Pretty stuff.
Andy Halterman
By golly we had some snow flurries yesterday in Hendersonville, NC�
>Would seem to be more that a bit of a hassel to maintain and protect that fragile weathered/"lichened" surface during all the machining. Do a lot of sled cutting? "New" edges of the panels and fronts provide a nice repeat for the top. Finger pull of hardware still to come?
I've always been a fan of "mixed-media" woodworking and I like your approach. That sink is indeed gorgeous. What type of faucets are you contemplating? Brandwise, I've had good luck with Moen. Thanks for posting.
>Looks great Clay. I have to say I've never seen a vanity made from "Lichen Wood", but it sure is neat!
Love the sink too. I need a new sink,faucet and counter in my bathroom but I'm afraid my flatwork days are pretty much over. I can't get to the table saw for all the bowl blanks. The available materials and sinks out there are amazing. I saw a really neat copper sink the other day.
>The boards were amazingly straight and flat. I jointed one side and edge, and that was enough to do the joinery. The panels are assembled with floating tenons. Since the style is "bunkhouse rustic," it doesn't matter if the weathered surfaces aren't even.
The doors and drawers are deep enough that finger holds or pulls may not be necessary. We'll live with it a while and see. I've collected some old screen door pulls I can screw on if needed.
>great work Clay. That thing is really going to shine when you get a thick coat of poly on that wood and flowering fungi. :-)
I am sure that there will be some here who would be worried about using a wood like this for this purpose, but I used some like this for my sisters house back in 1977, and it still looks as good as when I finsihed it.
By the way, my grand-dad had a mill, and had sawn the lumber to build the houses that I took the wood from in their last years. Most of the wood came from Aunt Matts house, which was for his sister-in-law. It was built back in the days before any welfare, after she became a widow. Back then, families did what they had to do, and took care of one another. so even the wood has a special meaning, besides my special touch. Ha.
>Sorry. Had to squeeze in here before the Colonel beat me to it. :-)
I like the mixed media in this piece, too. Very different. I like the medicine cabinet on the wall in your last shot. Did you make that? Can we see a fuller picture of that, too?
>In your last picture it looks like you applied an edging to the drawers and doors that, at least on my monitor, looks like the same wood as the top. Or did the finish just turn the end/edge grain darker? Whatever you did, it looks nice.
The outside edges and backsides of the drawers and panels have the weathered wood jointed flat. This gave me two flat and square registration surfaces for making the joints. The exposed wood edges and top complement each other.