Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Which router table w/Hitachi M12V?

Posts

Which router table w/Hitachi M12V?

#1

Which router table w/Hitachi M12V?

Dan Mitchell

>I would like to buy a router table to use with my Hitachi M12V plunge router, but I'm confused about the lift systems. All the ones I've seen, in addition to being pretty expensive, seem to be made for "round" routers, like the PC ones with interchangeable bases. Since the Hitachi is a plunge design, theoretically you can move it up and down, but doing this with precision while the router is under the table could be a major headache. I see something called "Router Raizer" which works with plunge routers, replacing the threaded column & allowing up & down movement. Hate to seem like a cheapskate, but $90 for this also seems like a lot for what looks like some all-thread & threaded sleeving. If anyone has any thoughts on using a plunge router like the Hitachi M12V in a router table, and suggestions of particular tables/accessories, I'd like to hear them!

Thanks

Dan

Re: Which router table w/Hitachi M12V?

#2

Re: Which router table w/Hitachi M12V?

Patrick Schupbach

>Check Woodpeck.com. They make a Unilift that should work for your Hitachi.Hope this helps!

Re: Which router table w/Hitachi M12V?

#3

Re: Which router table w/Hitachi M12V?

Tony - Memphis

>That's what I have. My table top is from Woodhaven. I use a Router Raizer. It works pretty well and was easy to install. I've been pretty happy with the arrangement. Adding the raizer made it much easier to make adjustments.

Tony

Re: Which router table w/Hitachi M12V?

#4

M12V bit changes a bear

Chris Knob

>You might want to consider a different router in your table. Even on the benchtop, bit changes in this router with its spring return shaft lock that requires you to use one hand to keep it in the locked position are problematic. Many woodworkers will tell you stories about shearing off the depth post assembly when they suddenly loose control of the collet wrench they are torquing against the nut.

Re: Which router table w/Hitachi M12V?

#5

Re: Which router table w/Hitachi M12V?

pecker

>I've never thought it was a big deal adjusting my Makita 3612 plunger from underneath the table. But then I'm a weekend woodworker, not a business.

If you want an inexpensive way to do this, you can get a crank handle for your Hitachi. See here:

http://pricecutter.com/product.asp_Q_pn_E_400-0920_A_cn_E_56069

And you can make it easier to use by removing the plunge springs, as described here:

http://www.routerworkshop.com/mark1.html?list=me01--


img

Re: Which router table w/Hitachi M12V?

#6

Re: Which router table w/Hitachi M12V?

Dave Bair, Eaton Rapids, MI

>I use the Veritas table with my M12V. The M12 is dedicated to table duty and stripped of all parts (including the sub-base, plunge springs and depth stops) not needed for table operation. I also attached a hand crank to the depth adjuster; I have no trouble with either speed or accuracy in depth-setting.

I find the collet lock to be of value since it allows easy one-wrench bit changes. The only issue I have is finding the speed adjustment dial from topside; it's too recessed to find by feel alone. But I seldom change speeds, so I don't get much practice finding it.

Re: Which router table w/Hitachi M12V?

#7

Re: Which router table w/Hitachi M12V?

Rich Pearson

>I use the handle from Pricecutter with my Hitachi M12V which is mounted in a New Yankee Workshop router table with the drawers, etc. I have removed the plunge springs from the router, and it makes adjustments easy. The crank handle works as advertised.

I use two wrenches to change bits. I found a metric wrench (22mm if I remember correctly) but it was too thick to fit in . I just ground the thickness down on my grinding wheeel until it was an easy fit. By using two wrenches(the "factory" wrench and my gound down wrench) and the "opposing squeeze" method, I can tighten and loosen without a strain or the wrenches slipping off.

I just take the router and router plate out of the table as a unit, set it on it's side and have at it. Less than a minute, including finding the next bit!

Re: Which router table w/Hitachi M12V?

#8

FYI - The Eliminator Chuck for the .........

Art Silva

>DeWalt 618 router fits the M12V. There is nothing faster for canging bits.

Re: Which router table w/Hitachi M12V?

#9

Not with the two wrench upgrade.

Rod Peterson -- Ormond Beach

>I've been preaching against damnable shaft locks for years. Bit changing is no problem at all on the M12V so long as you ditch the devil's tool shaft lock. I have an article on my website that covers it.

Rod

woodbutcher.net

Re: Which router table w/Hitachi M12V?

#10

Re: Which router table w/Hitachi M12V?

Dan Mitchell

>Thanks for the links & pics, I wasn't aware of either site. The crank looks like just what the DR ordered, and only $30 for my Hitachi!

Dan

Re: Which router table w/Hitachi M12V?

#11

Re: Which router table w/Hitachi M12V?

Dan Mitchell

>Thanks all for the great input! I'm leaning toward building a table, maybe adding an off the shelf fence. I've seen the NYW table video, very nice, but it's a bit ambitious for me, what with the drawers and all. Are there any especially good source online on building your own router table?

Thanks again,

Dan

Re: Which router table w/Hitachi M12V?

#12

Re: Which router table w/Hitachi M12V?

Barry Irby

>Dan, I have an ancient Stanley router mounted in a home made "plate" (piece of Masonite) as an insert in my TS wing. I have no real advice other than I have seen the handle (mentioned above) and have heard others say they removed the springs.

What I was going to mention was that I thought it was terribly clever that I could use the TS fence with the router. (I have a small shop and this multi tasking idea was irresistible.) Turns out to be not such a good idea. It seems that every time I get the fence set just the way it needs to be on one, I need it on the other. A router fence is on my short "to do" list even if it is nothing more than a board clamped to the table.

Re: Which router table w/Hitachi M12V?

#13

I have engines on both wings

Chris Knob

>15 amp on the right with a half inch collet, 12 amp on the left with a 1/4" collet. I hate collet changes! Built a dedicated drop over fence with dust collection for the Biesemyer that hooks up to the DC from the overarm blade guard hose and works very well. Only problem, as with all table saw router setups is that if I screw up a piece of stock milling with the router, breaking down the settings to mill more stock on the TS means never getting the return set up exactly the same. This is a real problem cutting cope and stick profiles etc...

Re: Which router table w/Hitachi M12V?

#14

Re: Which router table w/Hitachi M12V?

Norm Thomas

>Do as they do in the program "Router Workshop"! Remove the springs and adjust the height by lifting it out of the table and using brass spacers for measurments. I do it and it works fine. Also I made my table and it's a pretty easy project! Haven't made a permenent fence yet but that's an option. Good thing about this method is it's cheap! The ready made tables are also exspensive. Although I saw at an auction this last Summer a Bosch table and stand with a Porter Cabe router, a lift mechanism and a large Incra fence go for $600! Only thing that stopped me is I only had $200!

Re: Which router table w/Hitachi M12V?

#15

Re: Which router table w/Hitachi M12V?

Dan Mitchell

>Barry - I can see your point about the fence. My PM table saw had as an option a router insert with lift & separate fence built into in the extension table, at only $200 more than just the saw. I just thought it might get in the way there, but after doing some router table pricing, I should have gone for it, filled in the extension table hole & set the router portion up in its own table!

Dan


img

Re: Which router table w/Hitachi M12V?

#16

Re: Which router table w/Hitachi M12V?

Dan Mitchell

>Yeah, they really do seem a bit over-priced, relative to other machinery. "Roll your own" seems the way to go!

Dan

Re: Which router table w/Hitachi M12V?

#17

Dan, Check Your EMAIL

George@Colonel's Workshop-Havertown PA

>

Re: Which router table w/Hitachi M12V?

#18

Re: Dan, Check Your EMAIL

Dan Mitchell

>George-Thanks for the pics! I agree, buying a fence is a good idea, I'll look at the Penn State ones. I recently bought a Penn State dust collector which, aside from arriving without a manual (they faxed me one) seems fine. I have a nice piece of white formica left over from when I built my outfeed table for my TS which would be great for a top.

BTW, tried sending this reply to colgwdart@hotmail.com, got a permanent failure reply back.

Dan

Re: Which router table w/Hitachi M12V?

#19

Permanent Failures, eh?

George@Colonel's Workshop-Havertown PA

>Dan, that sounds like what I used to get in school/

George

Re: Which router table w/Hitachi M12V?

#20

You and me both, brother ;-)

Dan Mitchell

>