Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Teak & African Blackwood Outdoor Bench *LINK*

Posts

Re: Teak & African Blackwood Outdoor Bench *LINK*

#26

Re: Loveseat

Mark Mandell - Gone Round In Jersey

>Fine piece of work, Chico.

Have to agree with Ellis that the back supports are not as fluid as they might be. I would take the clue from the end posts, although it would present a whole new set of joinery issues as you move along the length.

With so much organic curves built into the piece, I think I would have preferred you using a similar treatment on the leg stretchers; those sharp edges and joints could be softened to good effect to reflect the arm treatment.

Do have to ask. What are the pegs in the end of the crown rail for?

Thanks for showing this piece! Quite strikiing.

MM

Re: Teak & African Blackwood Outdoor Bench *LINK*

#27

Great work, and design

Keith Newton

>I have been thinking of doing something along those lines for a long time, but for lack of a customer, I'm still waiting.

This is the best that I have seen in a long time. K

Re: Teak & African Blackwood Outdoor Bench *LINK*

#28

Spindles......Tried..no workie

HC Sakman

>Hi Ellis,

I thought about making the spindles flow as well and I cut test pieces from MDF (As I built 1:1 scale mock-up of the whole thing.) and they looked too busy and after several shapes, I settled for double "lumbar support" spindles for everywhere.

I have a feeling that I'll be making more of these, it'll certainly be easier.

Chico...

Re: Teak & African Blackwood Outdoor Bench *LINK*

#29

Lose end grain

HC Sakman

>I tried to break it by hand and it did not move Ellis. There's actually quite a bit of material there. I figured, if it ever breaks, I'll glue it and it'll be stronger than ever. Also, due to curving out armrest, that spot is way setback, well protected.

This bench is 37" @ the widest point, 31" at the narrowest. 35-1/2" tall and 99" long. Now, despite these dimensions, there is absolutely no twist, sagging or anything. If it's placed on an uneven surface, the end legs remain suspended. Very rigid frame.

Chico...

Re: Teak & African Blackwood Outdoor Bench *LINK*

#30

Re: Loveseat

HC Sakman

>Hi Mike,

Read my reply to Ellis. They are as "fluid" as they can be. Any other shape -flowing spindles, which everyone is different shape- were all tried out.

Sharp left edges of the "foundation" is part of the message attached to this design. You didn't think that I just forgot about rounding the lower edges, have you?

Chico...

Re: Teak & African Blackwood Outdoor Bench *LINK*

#31

Of course emotions shape my designs

HC Sakman

>"it's symbolic of how a love affair can have two sides at times, and how a long term relationship has its times of being together and apart. I don't know if these thoughts even entered your design process"

Hi David,

What you said above is very true indeed. Client is emotional, so am I and this is the end result.

Thank you very much.

Chico...

"I'll check with adoption services" ;-)

Re: Teak & African Blackwood Outdoor Bench *LINK*

#32

Darn,

HC Sakman

>There was quite a bit of your favorite pastime activities Charles. I hope to see you soon.

Thank you.

Chico...

Re: Teak & African Blackwood Outdoor Bench *LINK*

#33

Re: Whoa! You got Sketch Up to work for you?..:-)

HC Sakman

>Thanks Eddie,

Yes, armrests and supports were bandsawn freehand, shaped with files, spokeshaves, sander and router.

Yes, I am keeping most of the templetes.

Thank you very much,

Chico...

Re: Teak & African Blackwood Outdoor Bench *LINK*

#34

Re: Loveseat

Mark Mandell - Gone Round In Jersey

>Not at all, Chico. I read the repeated scolloped gusset motif just fine along with the stretchers' curves, the legs' organic tapers, and the very nicely dadoed joints. I was merely noting a treatment that my eye questioned because of its difference. I'll go back to my corner now.

Re: Teak & African Blackwood Outdoor Bench *LINK*

#35

simply wonderful..many nice touches

John Pappas

>

Re: Teak & African Blackwood Outdoor Bench *LINK*

#36

Pegs on the crown rail

HC Sakman

>Hi again Mike,

Behind the 1/2" sq. plugs, there're a double wedged dowel holding the post to the back slat, which is joined into the epoxied tapered bottom dado. Mechanical lock (a.k.a. joinery ;-) is more important than glue for outside furniture.

Center post's top end is a 1-3/4" x 5" x 5/8" tenon, so the peg is locking that.

1/4" pegs are holding the tenons.

Chico...

Re: Teak & African Blackwood Outdoor Bench *LINK*

#37

What's "frijole" Ellis?

HC Sakman

>

Re: Teak & African Blackwood Outdoor Bench *LINK*

#38

Re: Pegs on the crown rail

Dan Donaldson

>Technically, it is beans (as in pinto beans etc.), but it is also used as an idiomatic expression for WOW, or something like that.

Re: Teak & African Blackwood Outdoor Bench *LINK*

#39

Need Better Glasses

Mark Mandell - Gone Round In Jersey

>Went back and looked at some of your detail pics and inferred the reason for the pegs. Thanks for the explain, though.

mm

Re: Teak & African Blackwood Outdoor Bench *LINK*

#40

Chico,

Eddie Pacheco, San Jose, Ca.

>Ditto what Dan said.

You wouldn't want a guy like Ellis saying something like "holy snake farts" (or worse) as an opening line to another one of your great pieces of work, would ya?

Re: Teak & African Blackwood Outdoor Bench *LINK*

#41

Eddie,

HC Sakman

>Thanks for the other perspective view of this pinto bean business. ;-)

Chico...

Re: Teak & African Blackwood Outdoor Bench *LINK*

#42

Ellis Walentine

Brilliant answer

Ellis Walentine

>"I tried it and it didn't work for me" is the only answer that counts here, Chico. You don't disappoint me at all. :-)

Ellis

Re: Teak & African Blackwood Outdoor Bench *LINK*

#43

Re: Teak & African Blackwood Outdoor Bench

Nick Tuzzolino

>Another masterpiece! Congrats, Chico. It is always a real treat to see your work. I don't know how you can get them out so quick. My hands and fingers ache just thinking of all the sanding. Nick

Re: Teak & African Blackwood Outdoor Bench *LINK*

#44

Now that's what I call thinking outside the box !

Marv

>Chico,

Absolutely fabulous!

Marv

Re: Teak & African Blackwood Outdoor Bench *LINK*

#45

Top Rail

Joe Burke

>Assuming the top rail is solid, what was the size of the stock you started with? That would have to have been one healthy stick!!

Re: Teak & African Blackwood Outdoor Bench *LINK*

#46

Re: Beautiful design, wonderful execution

Larry Clinton

>You must have had some BIG planks to handle to start with - looks like the grain flows perfectly. That is museum grade work Chico.

Re: Teak & African Blackwood Outdoor Bench *LINK*

#47

Re: PIX are better in THIS POST...!

Thomas S Stockton

>Chico,

Finally got a chance to really look at the pics, very nice.In our last conversation you didn't like how the arm meet the leg, it doesn't bother me at all, but that type of transition or joint always seems like there has to be a comprimise. That's one of the reasons I much prefer to make side chairs over arm chairs the proportions are just nicer and it takes alot of work to design arms that don't look like they were just slapped on.The one thing that caught my eye was the visual weight of the vertical support that holds the front of the arm up, I would have made it alittle thicker from the front view but still try to keep it rectangular, as it is it looks lighter than all the other elements.

All in all a stunning piece

Tom

Re: Teak & African Blackwood Outdoor Bench *LINK*

#48

Perhaps "santos frijoles" would be a better clue?

Pam Niedermayer - Austin, TX

>

Re: Teak & African Blackwood Outdoor Bench *LINK*

#49

chico is the MAN !!!!

Mark Valsi

>

Re: Teak & African Blackwood Outdoor Bench *LINK*

#50

Tom...

HC Sakman

>Really? You think arm rest supports are too thin? Perhaps if you look at it straight on, but it's obviously proportional when viewed from the side. I needed to narrow the "S" bendof the armrest support slightly so it can pass through the square hole of the seat. Also, that piece can not be seen "head-on" due to its location. I scrutnized every part of this as much as I can. Heck, for the first time ever, I built a mock-up in 1:1 scale! I think the armrest support has enough meat on it.

Thanks Tom.

Chico...