Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Chain mortiser

Posts

Chain mortiser

#1

Chain mortiser

Nathan

>An opportunity arose for me to acquire this machine for about $800. It is very heavy-duty and versatile and my shop's electrics can handle it. The only thing I'm wondering is if, by the nature of the beast, a chain mortiser is going to cut really rough mortises and not be useful for smaller, finer work. Any thoughts welcome. Nathan


img

Re: Chain mortiser

#2

Doors....

John in NM

>I'd LOVE to have one of those! Make big honking 3/4" through mortises for doors!

Great score man.

Re: Chain mortiser

#3

Re: Chain mortiser

Keith Newton

>I have the Powermatic brand CM, that I am plenty happy with it. You got a great deal. Did you get several bars and chains with it as well?

You may find that you use it for certain things more than others, and that one size ends up staying on there most of the time.

Didn't you get a single end tenoner with it for that price? I sure hope so, I would hate to think that you got cheated. Ha

I use epoxy for the glue-up for most of the things that I have cut M & T joints for. Not necessarily because of sloppy joints, although it has excelent bridging capacity when it has been thickened, but because I know that I have plenty of open time, and the lubricity makes the assembly less anxious.

You are going to love having that machine in the shop.

Re: Chain mortiser

#4

Re: Chain mortiser

DAUTTERGUY

>Wow ,is that what that is called? I purchased one at a garage sale,took three guys two Horses and a mule, to get it in my P/U truck. The guy I purchased it from had a 3/4 bushing made and so I can use ANY Mortise Chisel in it, Mine does not have as many knobs and wheels as your does,but IT WORKS AND HOW!!!

Re: Chain mortiser

#5

All that's left is to convince SWMBO

Nathan

>I sent the guy who's selling it a message and will call him later tonight. It just appeared on his website (he sells refurbished woodworking machines) and he hasn't sent out a notification email about it yet, so I figure I've got a good chance of snagging it.

Here's what I know about it from the description:

- both the head and the table are tiltable

- it comes with several bars/chains

- the table comes off so you can mortise a lock in a full door

- nothing about tenoning - was that a joke?

- it weighs approx. 1,300 lb. and THERE'S NO MOBILITY KIT ;-)

- my shop is full and something else is going to have to go to accommodate this.

Nathan

Re: Chain mortiser

#6

Re: All that's left is to convince SWMBO

Keith Newton

>That sounds great to me. No the tenoner is not a joke, but it is not an attachment for this machine. A single end tenoner is another companion tool which can cut a tenon in one pass that will fit your mortise, and some even have cope heads that will do that part at the same time. They usually take up a lot more room though.

You should be able to cut a 1/2" w x 2" L x 4" deep in ~ 2 seconds, traverse 2" and plunge another 2 seconds.

Re: Chain mortiser

#7

Re: Chain mortiser

Keith Newton

>Guy, It sounds like you got a hollow chisel mortiser. This one has a chain-saw bar and chain instead of the hollow chisel, or did I miss something?

Re: Chain mortiser

#8

Re: All that's left is to convince SWMBO

Nathan

>Hi Keith. Now I get it the tenoner joke - yes, the price is right.

I air-dried some 8/4 oak that's waiting to be made into doors, so this would definitely be the ticket for heavy-duty stuff like that. I'm just not sure how good it will be on finer joinery. Obviously, I can always leave the cut shy and finalize the mortise afterwards with a chisel.

Cutting tenons is something I can deal with, but so far I have not found a good way to machine mortises. Hopefully, this is the ticket.

Re: Chain mortiser

#9

Re: Chain mortiser

DAUTTERGUY

>Naw,you did not miss a thing. My eyes did. When you get past the leagel speed limit things happen

Re: Chain mortiser

#10

Re: E-mail me if you can't use it

Brian in Brighton

>I can get you in contact with someone that I think could use it.

Brian in Brighton